Automation Systems

With a wide variety of modules, ATRO gives users the power to create almost any custom robot design within the rated payloads for their application – from a simple single-axis rotary indexing table application and delta kinematics up to multi-axis articulated robots. Expansive configurations with as many as 16 robotic arms are possible.

Lantek Expert V2021 includes 25 innovative cutting, punching and shearing strategies that offer more options for efficient destruction of slugs and to redistribute parts throughout the entire metal sheet to optimize the rigidity of the skeleton and further reduce waste. The system digitalizes scrap with previous cuts, identifies areas on the sheet available and allows for any part to be cut within that space, all with a simple drag-and-drop operation.

uniLoad is offered on the basis of a linear portal cell with two parallel grippers and is suitable for shaft components up to a length of 350 mm and a diameter of max. 100 mm. It thus covers a large proportion of the component ranges produced on these machines. The parts are supplied via a standardized, adjustable V-belt. The housing for the base module, which is provided with a loading hatch as standard, has been adapted to suit the machine design and enables safe and clean operation of the system.

Both the SmartMoma and the Nextage robots will be shown in working action during the IMTS 2022 in Chicago. The SmartMamo will transport full and empty cassettes between the grinding machines and the post‐grinding station. The Nextage humanoid robot will perform tasks such as tubing and labeling.

In contrast to conventional zero-point tooling systems, monitoring sensors were specifically designed for the MTS 4.0. Each of the four chucks in the MTS 4.0 base plate are equipped with a sensor to check the presence of the workpiece holder and to monitor the actuating piston. There is also a force sensor to measure the clamping power. Similar to previous MTS versions, the chuck is operated with compressed air for opening, re-clamping and cleaning functions.