Rigibore’s ActiveEdge Apex revolutionises fine boring, operating as a fully integrated, closed-loop solution to automatically compensate as the tool wears. Set and maintain critical tolerances, remove scrap and maximise productivity through this industry 4.0 ready solution.
For more information visit us at https://rigibore.com/products/activeedge/apex
Work hardening, welding, elongation of cutting chips and poor thermal conductivity are common problems when machining stainless steels and titanium alloys. OSG’s A Brand® ADO-SUS drill series is designed to excel in these materials. ADO-SUS’s "Mega Cooler™" coolant hole shape improves coolant flow and chip evacuation while reducing heat generation; this reduces work hardening and results in longer tool life. ADO-SUS also features OSG’s proprietary WXL® coating for improved wear resistance.
Why do indexable carbide drills excel in more extreme drilling applications? To find out, watch Allied’s senior product manager and engineering trainer team up to demonstrate.
Difficult drilling applications in this educational, 5-minute clip include:
Bob Warfield of CNCCookbook tackles the subject of Deep Pocket Machining in the 20th episode of the CNC Chef, a video series produced in collaboration with Cutting Tool Engineering.
For a more in-depth dive, visit Bob's article on the subject here:
https://www.cnccookbook.com/deep-pockets/
What do you do when you have a 0.688" diameter drill and you need a 0.697" diameter hole? This sort of question is common in shops that have a limited selection of cutting tools. Kyocera's DRV Magic Drill series can accomplish a radial offset to drill larger than the existing tool. The 0.697" hole shown was drilled in 1018 steel with a S100-DRV0688-5-05. Inserts were SCMT060205XMECA520D and SCMT060210XMIPR1535. Speeds and feeds used were 390 SFM, F.0016 IPR. The surface finish is very good due to excellent chip evacuation.
GEN3SYS XT Pro high penetration drills feature inserts designed specifically for steels (P), cast irons (K), and non-ferrous materials (N). The material-specific inserts for steel and cast iron have AM400 series coatings providing increased wear resistance and tool life. Inserts for non-ferrous materials are coated with titanium nitride. Diameters range from 11 mm (0.4331 inches) to 35 mm (1.378 inches), and are available in 0.1 mm (0.004 inch) increments. The flute design improves chip evacuation and the coolant configuration directs additional coolant to the cutting zone.
The A Brand® is a premium tooling brand that represents the quality assurance OSG guarantees to each and every customer. A Brand products (A-Drills, A-Taps and A-End Mills) are designed to exceed the evolving manufacturing needs for customers. Experience a new level of quality, reliability and satisfaction that can only be delivered by OSG’s A Brand tooling master class.
For more information visit OSG at http://www.osgtool.com/
