JET Three-Wheel Belt Bench Grinders

The new JETthree-wheel belt bench grinders are ideal additions to fabrication and machine shops for grinding castings or deburring and finishing ferrous and nonferrous metal workpieces. To accommodate a wide range of grinding needs on either flat or angular surfaces, these grinders come in three sizes, including 1″ x 42″, 2″ x 48″ and 2″x 60″ belt diameters.

The belt grinders are built for the long haul with heavy-duty, casted bodies and die casted belt levers. A vented full motor shroud keeps dust and chips away from the motor shaft. The motor also is protected by a thermal reset to prevent overheating.

Three-wheel design provides fine grinding surfaces. Abrasive belts are equipped with urethane drive and idle wheels for dependable and long-lasting service. An intuitive, lever-based belt tensioning process makes belt changes quick and easy.

Large throat clearance is provided, both vertically and horizontally, for grinding large and odd-shaped workpieces. Adjustment of the tool rest and platen are tool-less to save operator setup time.

Safety measures include an innovative dust port that directs sparks to the rear of the grinder and away from the operator. The 3 in. dust port mounts easily to a metalworking dust collector. Also, the power switch has a safety key to prevent accidental startups. All three belt grinders are CSA/US certified.

The belt grinders are driven by motors ranging from ¾ to 3 HP with constant belt speeds of 5,500 to 8,000, respectively. The 2″ x 60″ machine is available in single or three-phase models to allow installation in different shop environments.

The JET 1″ x 42″ three-wheel belt bench grinder (577100), JET 2″ x 48″ three-wheel belt bench grinder (577125), JET 2″ x 60″ three-wheel belt bench grinder – 1Ph (577150) and JET 2″ x 60″ three-wheel belt bench grinder – 3 Ph (577153) are covered by a 2-year warranty, as well as JET’s RED Assurance.