Mikron back chamfer milling tool

Mikron back chamfer milling tool

A milling cutter from Mikron Corp. Monroe is for back chamfer milling of small contours and bores, starting from 0.4mm in diameter. The company recommends conventional milling in two steps to avoid secondary burrs.

March 1, 2010
Cutting Tools & Tooling Grooving & Chamfering Tools Milling Cutters Machining Milling

A milling cutter from Mikron Corp. Monroe is for back chamfer milling of small contours and bores, starting from 0.4mm in diameter. The company recommends conventional milling in two steps to avoid secondary burrs. Standard sizes are from 0.36mm to 5.7mm for holes up to 5 diameters deep. Specials can be ordered, including ones for simultaneous deburring and chamfering of the front and back side of a workpiece.

Glossary terms in this article

  • milling cutter
    Loosely, any milling tool. Horizontal cutters take the form of plain milling cutters, plain spiral-tooth cutters, helical cutters, side-milling cutters, staggered-tooth side-millin…
  • chamfering
    Machining a bevel on a workpiece or tool; improves a tool’s entrance into the cut.

Related