Cold cuts: Drilling Performance

Applying a cold gas to reduce the temperature at the tool/workpiece interface and extend tool life or increase machining parameters is an established practice. Walter AG has taken that concept one step further with its Cryo-tec milling tools with two coolant channels, which deliver CO₂ and minimum-quantity lubrication compressed air or aerosol emulsion through the machine tool spindle directly to the cutting edge.

The Tübingen, Germany, toolmaker teamed up with Swiss-style machine tool builder Starrag AG to demonstrate and promote the technology. At EMO 2013, the collaborative effort won the MM Award for Innovation for having the most innovative exhibit at the trade fair in the milling category with its production-scale machining of turbine blades using CO₂-based cryogenic cooling.

“We cooperated with Starrag because they had the technology for the spindle to work with this kind of media and asked for cutting tools,” said Thomas Schaarschmidt, manager of business development–energy for Walter. He added that the toolmaker is open to working with other machine builders that develop alternative spindle technologies to apply CO₂ and a second coolant. Cryogenic cooling is also suitable for other machining operations, such as drilling and turning.

Courtesy of Walter USA

Walter’s Cryo-tec cutting tools, such as this modified Model F2334R milling tool, have two channels: one for applying CO₂ and one for applying compressed air or an aerosol emulsion.

Schaarschmidt noted the CO₂ and lubricant coolant remain separate until they exit the channel ports on the tool body and mix directly at the cutting edge.

The temperature of the liquid CO₂ is about 20° C (68° F) as it travels through the spindle and tool and then drops to -78.5° C (-108° F) when it fuses with the ambient air and becomes a gas and dry ice, explained Fabian Hübner, R&D project manager for Walter.