Medical & Healthcare

A new type of flute design reliably evacuates chips, even with the tinniest drills. This capability ensures that hole depths up to 30 × Dc can be easily achieved with the DB133 Supreme micro drill with its 140° point angle. The DB131 Supreme micro pilot drill features a 150° point angle. Emulsion, oil or minimum quantity lubrication (MQL) can all be used as a coolant with these drills. The DB133 drills without internal coolant are available in a diameter range from 0.020-0.116 in. (0.5-2.95 mm).

Energy-efficient dryer and centrifugal cleaning system from Rösler provide mass finishing in an efficient, sustainable manner

Putting screw threads in titanium poses special challenges but none that you can't meet.

As it is automated, reconstruction by Dual.Material CT is highly repeatable from component to component and does not require advanced knowledge of scanning techniques when inspecting assemblies comprising two materials of different densities. QC productivity is raised by enabling better visualization and more accurate definition of defects (on the surface or inside a component) in a fraction of the time taken by traditional CT image reconstruction. The high-speed scanning, and the fact that no manual data editing is required thanks to the new software and automated part handling, enables fast and automated quality control of dual material assemblies in a production environment, consistent with the requirements of Quality 4.0.

Photochemical etching is a metal processing technology that produces stress-free, flat components by selective etching through a photo-resist mask. It is especially well suited to the manufacturing of precision parts.

A spray with which workpiece dimensions and colour values can be digitised in one scan: AESUB transparent. The workpieces are sprayed uniformly with AESUB transparent from a distance of 15 to 20 centimetres. After just a few seconds, a matt, transparent layer is generated on the workpiece's surface. In addition to capturing the surface contours, optical scanners can simultaneously capture the colour values of the object being measured.

The miniature lead screw line is available with either standard or anti-backlash lead nuts to optimize positional accuracy, friction and repeatability. The anti-backlash lead nut design reduces friction between the nut and screw threads in order to optimize efficiency while still eliminating play between the lead screw and nut.

Swissbit's S-600 series is the first range to incorporate the new Hyperstone S9 NAND Flash Controller, explicitly developed for use in industrial applications. Unique firmware features guarantee an extended lifetime of safe and reliable storage of even the smallest data. First-class data preservation and data integrity is delivered in all situations: in high temperature conditions, through non-continuous writes, or sudden power failures.

Challenging customer projects have a long tradition at Mikron Tool. In recent years, the number of inquiries from the machining industry from a variety of areas has increased sharply, always looking for the most suitable drills and milling cutters or more efficient machining strategies.

Abrasive Technology LLC has named Guy Topping as its managing director of Abrasive Technology Ltd.

Representatives from ANCA and Fravic Daunert signed a distribution contract at IMTS 2022 to sell ANCA products in portions of Mexico.

The production of high-precision parts with complex interior geometries requires top quality along the entire production chain. In order to be optimally prepared for future cleanliness requirements, a Swedish manufacturer replaced one of its existing solvent cleaning systems. They chose an Ecoclean EcoCcompact fitted with Ultrasonics PLUS, to mention only one of the system's features.