Industry News

Economic activity in the manufacturing sector expanded in September, and the overall economy grew for the 100th consecutive month, say the nation's supply executives in the latest Manufacturing ISM Report On Business. The September PMI was 60.8 percent, an increase of 2 percentage points from the August reading of 58.8 percent.

Almost 30,000 metric tools from Komet Group GmbH, Besigheim, Germany, are now available through MachiningCloud Inc., Camarillo, Calif.

In manufacturing, the nature of the work as well as the nature of the workers are changing: What's a prospective employer to do? Some pre-Manufacturing Day discussion.

Entering the workpiece is an essential part of optimizing tool life and reducing vibrations. The roll-in method allows you to softly and smoothly enter the workpiece. Inserts are eased into the cut following the golden rule of milling: a thick chip on entry and a thin chip on exit.

Advances in technology and changing trade patterns are affecting opportunities for export-led manufacturing. Smart automation, advanced robotics and 3-D printing are new factors influencing which locations are attractive for production. While these shifts threaten significant disruptions in future employment, particularly for low-skilled workers, they also offer opportunities, according to a new report released today by the World Bank Group.

If you're lucky, the veterans in your shop will take a rookie aside and pass on their hard-won knowledge of good machining practices. Most of this information is priceless. But some of it … not so much. For example, there are a lot of myths about balancing out there that, if not refuted, can cost your operation a lot of lost time and money.

In 2017 robot supplies in the Americas will surge by 16 percent from 2016, according to the International Federation of Robotics. IFR estimates that by 2020 the worldwide stock of operational industrial robots will increase from about 1,828,000 units at the end of 2016 to 3,053,000 units—an average annual growth rate of 14 percent between 2018 and 2020.

A new report from Kaspersky Lab found that in the first half of the year, the manufacturing industry was the most susceptible to cyberthreats – with the industrial control systems (ICS) computers of manufacturing companies accounting for almost one third of all attacks.

Absolute Machine Tools Inc., Lorain, Ohio, hired Jeff Sturtevant as general manager of the Mason Technical Center in Mason, Ohio.

Join thousands of manufacturers Oct. 6 as they open their doors to show modern manufacturing in action and inspire the next generation of skilled workers. Manufacturing Day is an annual celebration in which manufacturers invite their communities—including students, educators, businesspeople, media and politicians—to facilities in a collective effort to educate visitors about manufacturing career opportunities and improve public perceptions of manufacturing.

If you have ever had parts or components CNC milled, you probably have a good understanding of the process. However, unless you have had custom products manufactured, you may not be aware of everything that goes hand-in-hand with custom CNC milling.

In the EU-funded project SelSus, Fraunhofer scientists are collaborating in a consortium with partners from research and industry to develop maintenance technology capable of forecasting machine downtimes in production before they occur. This allows plant managers to rectify faults before the machine breaks down. The system even corrects some defects automatically.