General Machining & Manufacturing Processes

​​​​​​​ARCH Cutting Tools Corp. in Bloomfield Hills, Michigan, has acquired North American Carbide of Orchard Park, New York.

This is the third ModuleWorks release of 2021 and contains new and enhanced features across the entire product range, including new multi-axis hole making cycles with independent feed rate control, a new morph pattern for laser aided manufacturing and a collision-free solution for robotics post processing.

New parting inserts are offered in the JXPS style : a 0.6 mm (.024″) width insert is designed for maximum parting diameter (CUTDIA) of 6 mm (.236″) and a 0.8 mm (.031″) width insert for 12 mm (.472″) CUTDIA, both furnished with pressed chipbreaker. This intricate chipbreaker creates optimally compressed and curled chips, allowing excellent chip evacuation and superior surface finish.

The operational temperature of the Mencom standard metal rectangular connectors is between -40°C and 125°C. However, the Mencom high-temp series enclosures and inserts are designed to withstand a higher range of temperatures up to 180°C (356°F) and cold temperatures down to -40°C (-40°F) when they are installed together. The enclosures are made of die-cast aluminum coated with high-temperature resistant, red-colored thermosetting powder.

In 2018, PricewaterhouseCoopers (PwC) predicted that manufacturers would turn increasingly to eCommerce to improve their processes — following examples set by Amazon, Tesla and Uber. This may seem outlandish, but a leading hydraulics manufacturer designed and acquired a tool in just ten days, with Sandvik Coromant's eCommerce platform.

While some of this momentum comes from COVID-19 pandemic-related shortages and shutdowns and supply chain back-ups; in the long-term reshoring has the potential to save U.S. manufacturers critical production time, reduce transportation costs and could better support just-in-time production by reducing capital tied up in stock.

Utilizing the latest machining options is important for shops to remain competitive and profitable. Join Cutting Tool Engineering and CAMWorks for this webinar to see revolutionary technologies and toolpath generation that reduce machining cycle time and increase tool life.

When drilling holes in most aerospace components, manufacturers have three chances of getting the hole correct — after which, it will be impossible to rework the hole within the required design specifications.

Through collaborative partnerships with customers and their partners, Seco Tools monitors trends and identifies challenges, developing the knowledge required to overcome the industry's most demanding issues. Putting customers at the heart of research and development (R&D) has paid rich dividends for Seco Tools in terms of identifying and developing new products and solutions that can help change the face of manufacturing around the world.

The anti-friction coating reduces radial distortion helping improve run-out. Parlec P3 ER collets have a repeatably accuracy of 0.0001" and are sealed for coolant pressures up to 2,000 PSI due to a special slotting design. Parlec P3 ER collets are available in ER11, 16, 20, 25, 32 and 40 in inch and metric sizes and are meant to be used with on-size tooling.

Highlights in hyperMILL® 2022.1 include a new break-edge function for contour milling, combined pocket milling together with a finish path allowing cutter compensation, and increased efficiency for 3D plane machining. The new automated 3D plane machining strategy improves machining quality by searching for suitable, high performance path layouts according to parameters including when adaptive pockets are present.

ARCH Cutting Tools in Bloomfield Hills, Michigan named two key manager positions. Anja Redzepagic was named national channel manager and key accounts, and Dave Valtierra was named West Coast Regional Manager.