Machining

Products • January 1, 2014

JHP Swissturn Toolholders

ISCAR is expanding the range of SWISSTURN square-shank toolholders by adding new tools for high pressure coolant and also tools without the internal coolant feature.

Products • January 1, 2014

Metalworking – Doing It Better

Published by Industrial Press Inc. and written by Tom Lipton, "Metalworking — Doing It Better" is an invaluable guide to both novice and veteran metalworkers.

Products • January 1, 2014

GrindSmartNano5 Grinding Machine

With the GrindSmartNano5, Swiss grinding machine manufacturer Rollomatic has developed a high-performance grinding machine for the series production of dental and medical tools that not only grinds an impressive range of tools, but does so fully automatically, without any operator intervention.

Products • January 1, 2014

SD-SP15 Slotting and Groove Milling Cutters

ISCAR is introducing the SD-SP15, a new family of narrow slotting and groove milling cutters, featuring 1.25" diameter milling heads with 8 teeth in a width range of .125" — .250" for maximum depth of cut up to .315".

Products • January 1, 2014

Type 27 Cotton Fiber Grinding Wheels

A line of Type 27 cotton-fiber abrasive grinding and blending wheels that provide smooth controlled grinding action, run cool, and are non-loading on aluminum is available from Rex-Cut Abrasives.

Products • January 1, 2014

Permanent Magnetic and Rare Earth Coolant Cleaners

Eriez HydroFlow permanent magnetic and rare earth coolant cleaners are for use with surface grinders, gear grinders, honing and lapping machines, broaches, milling and drilling machines, face grinders, oil reclaiming machines and essentially anywhere else clean coolant is needed.

Products • January 1, 2014

Farm-Jet Waterjet Cutting System

Jet Edge Inc. introduces the FARM-JET waterjet cutting system, a 55,000-psi waterjet cutting system designed and priced especially for the farm machine shop.

Products • January 1, 2014

Soft Blank Top Jaws

Soft blank top jaws from Dillon Manufacturing Inc. provide a smooth gripping surface, low T.I.R. (Total Indicator Reading), and have high holding power due to increased part contact.

Products • January 1, 2014

V-PRO CNC Plasma System

MultiCam's new V-PRO CNC Plasma system features a standard, heavy-duty, all-steel water table with integrated bladder capable of production processing of sheet steel up to 1.25" thick without the need for fume evacuation.

Products • January 1, 2014

VLC 200 H Vertical Hobbing Machine

Drivers are already used to the sixth gear, and the development continues. There are plans afoot for an automatic gearbox for a 9-gear transmission system. The reason is obvious, since it allows the car to be driven at optimal speeds for longer intervals and that saves fuel. Together with the continuing pressure to optimize, high volume gear production must become faster and cheaper. The EMAG Group has demonstrated their solution: the VLC 200 H Vertical Hobbing Machine that adds a new dimension to productivity levels.

Products • January 1, 2014

CNC Knife Option

MultiCam announces that its new, 4th generation CNC knife option is available on a wide range of cutting platforms.

Products • January 1, 2014

Square Shank Holders

Designed for use with Carmex Tiny Tools featuring 3, 4, 5, and 6mm diameters, the new Square Shank Holders have through-coolant capability.