Milling

Products • May 17, 2019

High Dynamic Turning With FreeTurn Tools

High Dynamic Turning, or HDT for short, from Ceratizit has turned conventional turning methods completely upside down. This new turning technology combined with the dynamic FreeTurn tooling, means that in the future it will be possible to carry out all traditional turning operations such as roughing, finishing, contour turning, face turning and longitudinal turning with just one tool. HDT is therefore an uncompromising method of turning.

Products • May 7, 2019

Pramet ISBN10 Cutters

The versatile Pramet ISBN10 cutters are suitable for high-feed milling, copy milling, ramping, helical interpolation, slotting and plunging. The unique pocket design in combination with the ANHX10 insert also perform shoulder and facemilling, offering a complete package for mold and die applications, from roughing to finishing.

Products • May 2, 2019

TungMeister Series of Interchangeable Milling Heads

Tungaloy expands its TungMeister series of interchangeable milling head system, to include 4-flute cutter heads with high-feed capability.

Products • May 2, 2019

CeramicSpeedMill Facemills

Tungaloy introduces CeramicSpeedMill for efficient milling of heat-resistant superalloys (HRSAs).

Products • May 2, 2019

BallRoughNose Ballnose Endmills

BallRoughNose is the latest development in Tungaloy's indexable milling technology for efficient and reliable rough profiling of curved surfaces.

Products • May 1, 2019

Threads-all ZGF-S-Cut Solid-Carbide Thread Mills

Emuge Corp. has introduced advanced Threads-all ZGF-S-Cut solid-carbide thread mills featuring multiple teeth, a helical flute form and multiple-layer TiAlN T46 coating. The new ZGF-S-Cut thread mills increase tool life over 10 times more than conventional tools and produce precise threads in exotic materials including Inconels, nickel-based superalloys, monel, titanium, 420 stainless steel and more.

Products • May 1, 2019

EDGECAM 2020.0 Software

The introduction of a specific 5-axis tilt control strategy, combined with a barrel cutter, is said to be the most significant enhancement in the latest release of EDGECAM, from Hexagon Manufacturing Intelligence's Production Software division.

Videos • April 29, 2019

Indexable Small-diameter High Feed Milling Cutters

The new cutter ensures high productivity and economy

Products • April 17, 2019

Dictator II MILLHOG Pipe Beveler

A new pipe beveling tool with an operating range from 4.5" ID to 24" OD that requires only one mandrel and 10 clamps for the entire range of the tool has been introduced by Esco Tool. The Dictator II MILLHOG Pipe Beveler uses one mandrel and a set of three wide clamps that provide six points of contact on the pipe ID, resulting in rigid mounting and chatter-free beveling for a given pipe size range.

Products • April 15, 2019

Positip 8016 Digital Readout

HEIDENHAIN announces the new Positip 8016 digital readout (DRO) with touch screen for manual machine tool applications. With its sturdy machined aluminum housing, this DRO promises to add reliability and ease-of-use to its milling, drilling, boring and turning jobs.

Videos • April 12, 2019

Drilling Versatility with the DRV Magic Drill

Kyocera's DRV Magic Drill series can accomplish a radial offset to drill larger than the existing tool.

Products • April 12, 2019

VLC 200 GT Turning and Grinding Center

It is no secret that e-mobility is a growing market. A current study by the consulting firm Strategy Analytics, predicts the production output of "electric vehicles" will increase to 25% of the global market by 2025. It should be noted that the study uses "electric" as an umbrella term that covers all aspects of e-mobility, i.e. hybrids, fuel cell drives, and pure electric vehicles, and that the markets are highly heterogeneous. It is expected that 50% of the production will take place in China, and the other 50% will be throughout the rest of the world.