Milling

Walter has added to its range of solid-carbide milling cutters with the introduction of its MC232 Perform product line. This versatile, cost-effective new cutter type is available with 2, 3 or 4 flutes, in a diameter range of 1/8 in. to 5/8 in. (2 to 20 mm).

Seco Tools released two new solid-carbide endmills that significantly boost metal-removal rates and offer exceptionally long tool life for a variety of today's challenging workpiece materials. The Jabro-HFM JHF181 is suitable for high-feed milling strategies in hardened steels and nickel-based alloys, while the Jabro-Solid2 JS564 and JS565 represent Seco's continued focus on developing tools for optimized roughing strategies for materials such as steels, stainless steels and titanium alloys.

In a blog, Dann Demazure, applications engineer at Datron Dynamics, wrote: Machinists ask me all the time, "When do I go fast and when should I go slow with a single-flute endmill?" Well, as you can imagine, there are a lot of variables at play regarding feed rates for single-flute endmills, but let's try to break it down.

SPRING Technologies announces the latest version of its flagship NCSIMUL SOLUTIONS. The new version sets a benchmark for comprehensive control of the machining process, allying ease of use, flexibility and automation to build the Factory of the Future, according to the company.

With the TENDO E compact, SCHUNK says it has started a new era in tool clamping with this universal toolholder that is suitable for applications such as milling, drilling, and reaming. SCHUNK now offers new extended lengths in CAT 40 (4") and CAT 50 (6"). Both are great for long-reach applications and in multiple-axis machines.

Makino introduces SGI.5, its latest version of Super Geometric Intelligence software for high-feed rate, tight-tolerance machining of complex 3D contoured shapes. Depending upon the specific geometry of the application, SGI.5 can provide 20 to 60 percent faster cycle times while maintaining accuracy and surface finishes.

The design of the knee mill goes back to 1936, when Rudolph Bannow's company produced a knee-and-column vertical mill with a rotating turret and sliding-ram head. The mill became known by the company's name—Bridgeport—which, like Kleenex, became the generic signifier for mills of similar design.

PFERD INC. has introduced TITANIUM cut burs, the latest addition to its high-performance Carbide Bur line-up. TITANIUM cut is specially designed for machining hard titanium alloys (with tensile strength greater than 500 N/mm2). With an innovative tooth geometry, TITANIUM cut generates stock removal rates up to 60% higher than conventional cross-cut burs, according to the company.

Power, speed, tactics, stamina – successful boxers need to bring together many different characteristics to emerge victorious from the ring. This image of versatility and talent is an apt metaphor for the new four-edged FIGHTMAX HPC roughing/finishing endmill for steel materials without a significant chromium content, developed by Inovatools.

New from Sumitomo Electric Carbide Inc. is the TSX series tangential milling cutter that is designed for exceptionally efficient shoulder milling. For stable, highly efficient machining at high feed rates, the TSX series is engineered with a tough and sharp cutting edge, according to the company.

Fast and reliable milling of stainless steel, titanium, heat-resistant alloys or even CrC alloys is a huge challenge for many machine operators and tool manufacturers. To overcome the challenge, the Swiss cutting tool manufacturer Mikron Tool launched CrazyMill Cool, a product family that promises a valuable solution in a diameter range from 0.3 mm (0.012") to 8 mm (0.315").

Fine filtered cooling lubricants represent an important cornerstone in tool manufacturing and are instrumental in achieving high tool quality quickly and economically. Tool manufacturers, who rely on the right technology and competence of their filtration system manufacturer, capitalize optimally on the many advantages offered by efficient coolant filtration.