Milling

Products • October 1, 2010

DZ 12K S Magnum

DZ 12K S MAGNUM five axis from Chiron America Inc. is a double-spindle, highly productive, 5-axis complete machining center with 2-axis tilt rotary table for milling and turning complex workpieces in one set-up.

Products • October 1, 2010

NBV 700 MT (Mill/Turn) Machine

Shorter cycle times are one way of reducing costs; another way to be more productive actually involves longer cycle times: complete machining in a single setup. Clamping a part only once means reduced costs for fixtures, less time spent on setups for different machines, while improving quality by avoiding reclamping errors. This is exactly where the new vertical milling machine from MAG comes"

Products • October 1, 2010

Beyond Blast inserts channel coolant through inserts

Kennametal Inc.'s Beyond Blast inserts channel coolant through the insert to the milling cutter/insert interface.

Articles • September 1, 2010

Deformation machining combines two techniques

Machine Technology column for the September 2010 issue of Cutting Tool Engineering.

Products • September 1, 2010

MFPN facemill

Kyocera Industrial Ceramics Corp., Cutting Tool Div.'s MFPN facemill accepts PNMU inserts, which have a double-sided, pentagonal design that provides 10 cutting edges per insert.

Products • September 1, 2010

Tendo-ES

SCHUNK Inc.'s TENDO-ES is a short hydraulic expansion toolholder, which allows the tool to be clamped directly in the mounting taper.

Products • September 1, 2010

Rego Plus

REGO-FIX is introducing the new REGO PLUS line of toolholders. Fully compatible with all BIG PLUS spindles, these new toolholders are licensed by BIG Daishowa.

Products • September 1, 2010

Power 4 Cutter for Turbine Blade Production

Seco Tools' new Power 4 copy milling cutter has been developed in cooperation with customers in the power generation sector to create an optimized solution for turbine blade production.

Products • September 1, 2010

TiNox-Cut

Emuge Corp. announced the introduction of TiNox-Cut, a new series of end mills specifically developed to provide exceptional tool life when machining challenging materials.

Products • September 1, 2010

Calculator Application for Mobile Phones

Sandvik Coromant has released a free application designed to provide engineers and machinists with a convenient resource for calculating cutting data.

Products • September 1, 2010

HRMDouble Mill series cutting tools

Korloy America Inc.'s HRMDouble Mill series cutting tools accept inserts with six cutting edges. According to the company, the cutting edge's high rake angle enables high-feed machining and improves multifunctional machining, which also reduces the cutting load.

Products • September 1, 2010

Milling inserts

Mil-Tec's Magna-Shear geometry is ground on all insert surfaces and has a premolded chip-clearing formation.