Surface Finishing & Coating

Products • March 17, 2016

Mini Chamfer Tools

Rugged enough for use with virtually all materials, Carmex's new Mini Chamfer tools are the ideal solution forndeburring, back chamfering and grooving operations. Designed with spiral flutes for smoother cutting action, the tools offer double-side cutting and are available in both long-reach 45-degree and 150-degree configurations.

Products • March 3, 2016

sPINner Deburring Machine

The sPINner machine from Techniks Industries quickly batch deburrs dozens of small parts. sPINner pin media deburrs where other media cannot reach and eliminates manual deburring, according to the company.

Products • March 2, 2016

EcoCDuty Cleaning System

Heat-treating contractors, metalforming shops and companies from the automotive and aircraft industries in particular require cost-efficient part cleaning and degreasing equipment capable of handling high capacities. Addressing this demand, Dürr Ecoclean has developed an innovative solvent-based cleaning system, the large-chamber EcoCDuty.

Products • February 25, 2016

Brush-on Metal Blackeners

Birchwood Technologies three brush-on metal blackeners—Presto Black BST4, Antique Black M24, and Aluma Black A14—are now available in smaller, quart sized (32 oz.) bottles for easier application and handling, at a new lower price point.

Products • February 18, 2016

AH8000 Series Inserts

Tungaloy Corp. has introduced the AH8000 series of PVD grades and chipbreakers for turning heat resistant alloys. The new PVD grades feature impressive resistance to both wear and fracture due to the world's first nano-multi-layered AlTiN coating with high Al content and dramatically reduces notch wear, crater wear and built-up edge in machining heat resistant alloys.

Products • February 2, 2016

Technical Sales and Service Support

Fischer Technology Inc., a Windsor, Conn.-based manufacturer of instrumentation for coating thickness, material testing, nanoindentation and material analysis, announced plans to open a new office in Livonia, Mich., to provide technical sales and service support for the Michigan area.

Articles • February 1, 2016 • Doris Schulz

Component cleanliness requires effort throughout manufacturing process

Specifications for particulate and film-residue cleanliness are a matter of course for many machined components. In addition to the parts cleaning procedure, manufacturers must consider the entire process chain when seeking to efficiently achieve and maintain the required level of cleanliness.

Articles • February 1, 2016 • William Leventon

Form of solid carbide harder than diamond

Researchers at North Carolina State University reported the discovery of a distinct form of solid carbon they estimate is about 10 percent harder than diamond and could play an important role in machining. They also claim to have developed a relatively inexpensive technique for producing the substance, called Q-carbon, at room temperature and ambient atmospheric pressure.

Products • February 1, 2016

Pramet SF & SM insert geometries

Dormer Pramet now offers Pramet SF and SM geometries for machining of high temperature alloys and stainless steel, the company announced Jan. 27. The SF geometry features a sharp positive geometry with an inclination cutting edge of 14.5° while the SM chip-breaker is a wear-resistant, universal geometry for medium machining.

Products • January 18, 2016

P6005-WKK45C point drill insert

In a news release issued Jan. 16, Walter USA LLC, Waukesha, Wis., unveiled its P6005-WKK45C point drill insert that reportedly brings new levels of performance and cost effectiveness to drilling cast materials (ISO K) as well as other materials. The P6005-WKK45C insert design features a new high-performance geometry for maximum productivity in cast iron materials, and 110° prismatic seat for minimal run-out and stable positioning.

Articles • December 1, 2015

Flexible Hone Plays Role in Raising the Costa Concordia

The Flex-Hone Tool, characterized by the small, abrasive globules that are permanently mounted to flexible filaments, has long been used for everything from automated metal finishing to maintenance and repair operations. Now the Flex-Hone can add one more claim to its resume: playing a small, but important, role in one of the largest engineering feats in marine history—the raising of the shipwrecked Costa Concordia.

News • November 20, 2015

Osborn announces new territory sales manager

Osborn, a leading supplier of industrial brushes, polishing compounds and buffs, recently announced that Kevin Pearson has been named territory sales manager for Tennessee, Mississippi and Alabama. Pearson, who will oversee technical sales within his respective territory, has more than 20 years of sales experience in the southeast region of the United States, and has sold a variety of products for the extrusion, injection molding, stamping and casting industries on the distributor, aftermarket and OEM levels.