Turning

The added anti-vibration boring bars with C6 PCS machine side connection are suitable for up to 9xD boring depths, allowing direct assembly on the machine spindle or turret without the need for adapters. The boring bars can also minimize chatter as an integrated vibration damper suppresses unwanted vibrations during machining.

WCH10C inserts deliver high repeat accuracy due to its sintering process and are tough and wear resistant due to the strong connection to their titanium carbide substrate. Optimum surface quality is promoted as well by their uniform grain distribution in the substrate, The new Walter coated mixed ceramic grade WCH10C inserts can be used effectively on materials ranging in hardness from 45 up to 60 HRC.

Go and No-Go Ring Gages are manufactured with hardened tool steel for exceptional durability and feature a fully knurled circumference for maximum gripping ability and safety. No-Go gages are clearly marked with a red ring. UNC and UNF gages have a 2A tolerance.

Starrag welcomes two verticals to its HMC family.

The cartridge is manufactured as a single piece so everything within it is perfectly aligned and optimized. As a result, the Hypertherm cartridge for Powermax systems will last up to twice as long and deliver cleaner cuts versus traditional consumables.

This new feature for multi-axis machining automatically applies a rest finishing cycle to any remaining non-machined areas that could not be reached by the wall and floor finishing operations. The wall and floor finishing operations carry information about which areas can be machined and which areas cannot.

Advanced tool holders with precision coolant improve cost-efficiency in steel turning.

Take the plunge with the best grooving tools and techniques for the job.

Robots can not only improve working conditions for existing personnel but help attract new, young colleagues.

HCL CAMWorks 2021Plus is one of the first integrated CAM systems to support Sandvik Coromant's PrimeTurning, which uses CoroTurn Prime Type-A and Type-B tools in conjunction with unique toolpaths to achieve increased feeds and speeds, shorter cycle times and longer tool life. PrimeTurning offers the flexibility for turning operations in all directions.

The FW5 wiper geometries, with a new wiper curved cutting edge and V chip formation for short chips, can also be used on components with long overhangs thanks to the reduced cutting pressure. In addition, the MW5, with its longer cutting edge, is suitable for the highest feeds.

The PRAB Bundle Breaker installs in a conveyor's in-feed hopper, where dual rotating cylinders agitate the material, shredding stringy wads of chips, turnings, and bundles apart to allow for effective processing in downstream equipment. The PRAB Bundle Breaker may be added to an existing conveyor or incorporated into a new PRAB metal scrap processing system.