End Mills

Products • May 18, 2016

MK Tools’ Solid-Carbide Round Tools

MK Tools' solid-carbide round tools from Monaghan Tooling Group introduces new "Speed-Drill R4" geometry, reportedly offering unparalleled cutting speeds and unprecedented tool life in gray cast iron, ductile iron and forged steel—all popular materials in automotive engine and chassis components. With a new corner radius design, which is tangential to the drill point but nontangential to the diameter, these proven designs address challenging, high-production drilling applications.

Products • April 27, 2016

SN 200R/400R/500R Endmills

Niagara Cutter has expanded its range of endmills for high-feed milling applications. The new Niagara SNn200R/400R/500R solid-carbide endmills with 2-, 4- and 5-flute options allow parts manufacturers to achieve maximum productivity when performing face, slot and select plunge milling operations. Niagara applied the latest design and grinding developments to the SN 200R/400R/500R endmills, which feature a defined radius (rp) that helps direct radial cutting pressure axially up into the tool holder and spindle.

Products • April 27, 2016

EIV5 Series Endmills

The EIV5 series from Millstar is revitalizing conventional practices for machine shops. With its combination of radial grind, variable helix, variable pitch and radius preparation, the EIV5 is a versatile endmill engineered for diverse machining applications.

Products • April 19, 2016

A1-303 Series Cutters

RobbJack says its A1-303 series allows you to machine deeper parts, slots and walls in one pass, with minimal chatter and vibration. The A1-303 tool's chatter-reduction geometry is ideal for high-speed machining of aluminum and other nonferrous materials.

Products • April 19, 2016

FM Series Tools

RobbJack's FM series with chatter-reduction geometry, tackles deep pockets, thin walls and other severe aluminum applications. These high-performance tools reduce or eliminate chatter and ledging, and in many cases, eliminate the need for secondary finishing operations.

Products • April 19, 2016

DM/MDM Series Endmills

The RobbJack says its DM/MDM series with new carbide and coating combination, eliminates or reduces the need for polishing, reduces wear by 909 percent, holds tighter tolerances and lasts 450 percent longer than comparable carbides and coatings designed for hard metal applications.

Products • April 8, 2016

Additions to OptiMill Milling Cutter Line

With trochoidal milling, significant improvements in terms of tool costs, clamping, processing times and load on the machine components can be achieved in many applications compared to conventional milling. For this milling technique, MAPAL has expanded its OptiMill product range by adding mills for the machining of titanium and high-alloy steels, as well as for hard machining.

Products • April 7, 2016

Rushmore Solid-Carbide Endmills

Rushmore USA's solid-carbide endmills from Travers Tool Co. Inc. reportedly ensure better chip evacuation and higher metal-removal rates. Cutting Tool geometry is designed to prevent failures as a result of aluminum sticking to the cutting edge.

Products • April 7, 2016

Miniature and Microsized Carbide Cutting Tools

Microcut, a manufacturer and distributor of miniature and microsized carbide cutting tools, has produced a 180-page catalog, It includes new lines of variable-helix 3-flute endmills in long-reach, long-shank, long-flute and corner-radius versions. In addition, 272-degree spherical endmills, miniature long-reach corner-rounding endmills, and 82-degree drill point mills are offered.

Products • March 31, 2016

Force Multiple-Flute Endmill

Fullerton Tool Co. offers a new multiple-flute endmill for high-speed machining, the Force. The Force is suitable for cutting steel, stainless steel, high-temperature alloys and titanium. The endmill also includes an advanced FC-20 coating, which allows the Force to machine wet or dry.

Products • March 29, 2016

365 Variable-Helix Endmill

The 365 variable-helix endmill from Ultra-Tool International Inc. features the SmoothFlute geometry. From roughing to finishing, convention milling to HSM peel milling, the 365 offers increased productivity and tool life, according to the company.

Products • March 29, 2016

5-Flute Endmill

A new 5-flute endmill for machining titanium is available from Advanced Tool Inc. It is for aggressive machining and extends tool life, according to the company.