End Mills

Products • January 4, 2022

CrazyMill Cool P&S Toric Version Milling Cutter

A unique tool for numerous applications: Milling of holes, ramps, pockets, grooves and sides. Seemingly without resistance, the milling cutter plunges into the materials that are difficult to machine. It cuts powerfully with high precision, stability and excellent cutting parameters, even into the solid - effortlessly. Behind this perfection is a sophisticated technology composed of a multitude of factors.

Videos • January 1, 2022

RF 100 Micro-Diver micro carbide end mills

High-performance milling at diameters from 1/32". Plunging, ramping and milling with one tool! Watch the micro-Diver in action in this video.

Videos • November 22, 2021

WESTEC 2021 Booth Visit: Carmex Precision Tools

Watch an overview of the latest products and technology from Carmex Precision Tools as presented by Leonard Ahumada, an applications engineer and the company's Western regional manager. Cutting Tool Engineering recorded the booth visit during WESTEC 2021 in Long Beach, California.

Products • November 11, 2021

VariMill Chip Splitter

This high-performance end mill is designed with non-overlapping chip splitters along the flute cutting edges. The result is more efficient MRR, while maintaining the ability to make finishing passes. The unequally spaced design feature allows each sequential cutting edge to remove any remaining material left by the chip splitter of the previous flute. The tool's innovative design reduces breakage and makes it versatile enough for both roughing and finishing passes.

Products • October 16, 2021

JSE510 End Mills Series

The reoptimized design of the new JSE510 offers unparalleled versatility based on the previous version of this product range. The new series targets general engineering, contract manufacturers and job shops, as well as the aerospace, medical and automotive industries. The design is reoptimized to stand up to tough milling applications with a versatile carbide grade, advanced polished SIRA coatings and a strong, sharp cutting edge. To extend tool life further, these tools offer vibration-damping variable pitch design and optimized helix.

Products • October 6, 2021

End Mills Catalog

The 172-page catalog, brimming with hundreds of new products, specifications, technical materials, cutting data, drawings and images is available free in print by request at www.emuge.com/media-resources/order-brochures-catalogs, or via an online interactive version on the EMUGE-FRANKEN N.A. website: www.emuge.com.

Products • June 23, 2021

TiNox-Cut End Mills

TiNox-Cut End Mills are made from premium ultra-fine micro grain solid carbide with a maximized transverse rupture strength for high impact applications, and produce impressive results compared to conventional end mills. Advanced PVD-applied multi-layered coatings withstand excessive heat and provide superb wear resistance for longer tool life, and tool geometry is designed to produce minimal vibration when machining tough materials.

Products • June 22, 2021

Alumigator ASR-5 End Mill

This revolutionary new end mill boasts an unequal indexing configuration that reduces chatter for the optimized high efficiency milling of Aluminum Alloys. Designed and engineered from the Alumigator family of high performance aluminum mills, the 5 flute configuration with polished flutes can achieve metal removal rates in excess off 100 cubic inches per minute. Staggered roughing serrations and proprietary gashing geometry ensure small chip size to enable more aggressive feed rates and depths of cut.

Products • June 15, 2021

Supercut Roughers

The innovative roughing geometry results in smaller chips and low cutting forces, and a reinforced corner chamfer promotes additional strength for longer tool life. Designed for semi-finish profile and center cutting, the multi-flute design is constructed of ultra-fine carbide grade CR3 for high cutting edge stability and wear resistance. The tools also feature a new generation of PVD coating for High Performance Cutting (HPC) applications.

Products • May 18, 2021

M213 STREAKERS

M213 STREAKERS feature three extremely large flute cavities, uniquely designed end face and gashing, and 37-degree helixes to achieve deep cuts and high feed rates. IMCO's special end face and flute grinds combine to create a free cutting action allowing aggressive plunging and ramping moves

Products • February 27, 2021

XSYTIN-360 Solid Ceramic End Mills

XSYTIN®-360 end mills have shown the highest material removal rates and resulted in increased productivity on a wide range of materials. These end mills have proven to be extremely effective when machining a variety of different materials including high-temperature alloys, 3D-printed sintered high-temperature alloys, hardened steels, ductile cast irons, and compacted graphite iron (CGI). In hardened steels specifically, the tool life of XSYTIN®-360 end mills has proven to be equal to high-performance carbide end mills when run at high-end speeds (11,460 RPM), while also removing over 73 cubic inches (over 1200 cubic cm) of material.

Products • November 24, 2020

S-Mill Series Carbide End Mills

The sharpness of these end mills reduces the occurrence of burrs, produces remarkable surface finish, and improves tool life to outperform the competition. S-Mills are available in 2, 3, and 4 flute designs with a range of diameters to cover a wide variety of applications (2 flute available in a 2mm dia.) and in 40, 45, and 50mm lengths that are ideal for automatic lathes.