Machine Tool Attachments & Accessories

FlexMove Helical Plain Bend Conveyors provide customers with unlimited configurations, including flat to flat; flat to incline or incline to flat; or incline to incline. These configurations, which also include inclines and declines through corners and straights, provide great flexibility for applications involving product buffering especially in corners. FlexMove Helical Plain Bend Conveyors also come with a patented side roller chain to reduce corner friction.

Due to its heavy cast iron construction, smooth power transmission and precision thrust and ball bearings in the head stock and spindle, the bench lathe provides years of trouble-free, precise turning. The Bench Lathe is the right choice for turning small metal parts.

The AF160 can process parts with an outside diameter of up to 60mm and a length of 250mm. The machining length is between 110 and 180mm. The eight axes – all of them independent – make the AF160 the most flexible Affolter machine to date. It can produce straight gears, helical gears, straight bevel gears, face gears, straight or helical crowned gears, worm screws, worm wheels, cylkro gears, and internal gears. Power skiving, the milling of worms and shafts, as well as chamfering is possible, too.

Mencom's new field wireable connectors are UL listed and provide IP69 protection. They are available in 3-pole and 4-pole with straight and right-angle orientations. Mencom is the industry's first electrical connector manufacturer to design and produce a right-angled version of the 1 3/8" field wireable connector. The right-angle profile is lower than the typical bend radius needed to mount a straight cable, providing a big advantage when installation space is limited. Also, it removes undesirable cable strain caused by bending cables to fit in tight spaces.

The ECM 2400 encoders are available with EnDat 2.2 interface. In conjunction with a safe control, they can be used as single-encoder systems in applications with control category SIL 2 (as per EN 61508) and with Performance Level "d" (as per EN ISO 13849). The fault exclusion that is implemented in its design has been tested and is ensured under the specified operating conditions.

The 22.25" x 25.75" chart provides technical information on each of the grades such as grain structure, hardness, cobalt content, etc. as well as the materials applications they are best suited for. Additionally, each grade is associated with appropriate industries – Automotive, Defense, Energy, Wear & Die.n

Fewer than 30% of manufacturers have extensively adopted Industry 4.0 technologies, according to findings published in a new report, but manufacturers' reluctance to go digital might have to change if they are to adapt to an unpredictable future. Sandvik Coromant's testing finds that an increase in machine utilization can result in a higher gross profit margin.

Save time and money by reducing your design time and deep hole drilling! They allow a single circuit to feed up to a dozen individually sequenced devices. These valves install directly into the device port and can be individually adjusted to time your clamps.

Five trends have helped triple the number of annual installations of industrial robots within ten years (2010-2019) reaching 381 thousand units in factories around the world.n

Renishaw supports all of its probing hardware with easy to use software that compliments the full potential of machine tool probing applications.

The TMX Series consists of two models: the TMX 7510 and TMX 6410. The TMX 7510 reaches 76,000 frames per second (fps) at full 1-megapixel (mpx) resolution (1280 x 800). It also achieves over 300,000 fps at 1280 x 192 and over 770,000 fps at reduced resolutions. With the export-controlled FAST option, the TMX 7510 can hit a blistering 1.75 million fps with a 95-nanosecond (ns) minimum exposure time, eliminating motion blur and enabling precise motion analysis.

Built to Dialight's iconic performance and reliability standards, the Low Profile High Output High Bay also carries the company's industry-leading 10-year warranty, an L-70 rating greater than 150,000 hours and DLC Premium 5.1 on most models. At up to 155 lumens per watt, the new fixture provides a more efficient and cost effective alternative to legacy lighting technology such as 1000 watt HID fixtures. The High Bay is also designed for optimum thermal management and has a wide operating temperature range of -40°F to +149°F (-40°C to +65°C)..n