Safety & Environmental Equipment

Products • October 19, 2021

Carabiner and Lanyard Kit

The carabiner and lanyard kit removes the potential of dropping items in areas with an increased safety risk, or above environments where retrieval would be time consuming, difficult or impossible. As a result, the system makes working safer, faster and removes the danger and cost associated with losing tools and equipment. The kit is intended for applications involving working at height or environments such as marine. The carabiner and lanyard kit can also be used to remove the risk of an operator becoming separated from machinery, such as connecting a pilot of a boat or jet ski to a kill switch.

Products • August 26, 2021

Safety Helmets

The Milwaukee Safety Helmets are designed to give users better protection by offering protection from both top and side impacts. The helmets are BOLT compatible with four BOLT accessory slots and two universal accessory slots, allowing users to adapt to their jobsite and easily attach additional personal protective equipment and accessories. Additionally, the helmets include a BOLT Headlamp Mount that is suitable for most headlamps and a BOLT Marker clip so users can attach and easily access pens, pencils, and markers.

Products • August 10, 2021

I.Cee:Local Sensor

The i.cee:local sensor from igus optimizes the life of the system, detects faults, allows them to be fixed at an early stage and allows for maintenance to be planned in advance. With its multi-connectivity, i.Cee:local can be integrated via the internet or without IoT connectivity via the local network, depending on customer requirements.

Products • June 8, 2021

Visorguard-LED

Flexbar's Visorguard-LED™ system is water and coolant proof and installs in minutes on CNC mills, conventional mills, drill presses and more. The adjustable Flexbar® arm permits setting of the Visorguard shield at the correct height and angle for each setup, then locks rigid. The special wing-shaped shield flips up to load a part and down for machining. A special spring-loaded shaft allows the shield to stay put with no spring back.

Products • May 8, 2021

iShield Camera

In addition to the microSD card, the solution includes the 'iShield Camera Card Tool' (iCCT) software, which is a free download from the Swissbit website. With iCCT, the card's security settings are activated via the computer before it is used for the first time. The user PIN is also set here. The card is then ready to deploy and will reliably capture all recorded camera data. iShield Camera supports Loop Recording, where a camera deletes the oldest recordings to make room for new data.n

Products • May 1, 2021

ScanGrid2 Safe Multibeam Scanner

The scanGrid2 safely detects objects of a variety of sizes within the freely configurable protective field zones, can evaluate multiple fields, and can execute configurable monitoring cases. A warning field zone extending up to four meters beyond the safe working range can be employed for non-safety actions.

Products • April 29, 2021

Knee Pads

The Hard Cap Gel Knee Pads are built with a secure gel zone to provide better comfort and create a contoured fit to the user's knees. Constructed with thick comfortable foam and durable caps, these knee pads are designed for extended wear and can withstand a variety of surfaces.

Products • April 13, 2021

sBot Stop – URCap and sBot Speed – URCap

The sBot Stop – URCap and sBot Speed – URCap are easy-to-use safety systems based on the smart combination of the nanoScan3 safety laser scanner and UR Robot safety features. These solutions work well in handling operations using robot applications with free access and enable manufacturers to achieve safety without sacrificing productivity.n

Products • March 25, 2021

X-86m2 Series and CFast Card F-86

The X-86m2 series in the ultra-compact M.2 2242 form factor and the CFast™ card F-86 show off their full performance capabilities, especially as robust boot and application drives, and set themselves apart with a perfectly coordinated feature set. The key highlights are a high-quality 3D-NAND in pSLC mode, a SATA NAND flash controller specially developed for industrial requirements without additional DRAM, and fully optimized proprietary firmware. This makes both series the optimal storage solution for embedded systems and industrial applications, as well as for network devices where durability, system reliability and safety from power failure are imperative.

Products • March 3, 2021

Surveyor’s and Mesh Safety Vests

The Surveyor's Safety Vests are designed with full, tear resistant woven construction for maximum durability to survive the most rugged environments and built to carry more with 27 pockets. The Surveyor's Vests are Type R Class 2 Rated** and recommended when working in environments requiring additional visibility, when working around heavy machinery or traffic traveling under 50 MPH. The vests are offered in both yellow and orange color variations.

Products • February 27, 2021

RCN Angle Encoders

When paired with an EIB 5211 sensor box, these new RCN encoders will transfer the temperature of the encoder and a direct-drive motor to the control in use. This gives the user the ability to push the system to its thermal load limits which in turn increases production and cost efficiency.

Products • December 29, 2020

Flexi Compact Modular Safety Controller

The Flexi Compact safety controller offers users in the machine building sector improved usability in many areas. The modular hardware platform enables integration in a flexible, application-appropriate, and cost-efficient manner. If the demands on the safety controller increase, it can subsequently be adapted or extended by up to 12 modules. The Safety Designer engineering tool with its certified function blocks guarantees intuitive, fast, and easy configuration and documentation of the safety logic via drag and drop.