Safety Products

Magid's Flex Series expands with a new palm coating that delivers superior wet and dry grip.

Wooster Products' FLEXMASTER® Safety Renovation Treads offer an easily applied anti-slip surface to interior or exterior stairs. An extruded aluminum base is covered with Flex-Tred® anti-slip tape which provides a much higher coefficient of friction, whether wet or dry, significantly reducing the risk of slips or falls.

Magid has taken coreless cut protection to the next level with DX+ Technology®.

These sleeves are designed to provide users with a comfortable fit and all-day protection. The secure tapered fit and silicone printed bicep band prevent sliding, reduce sagging, and limit material bunching and an elastic thumb loop keeps the sleeve in place when putting on gloves. To help users stay cool and protected while working in hot conditions, they have a moisture-wicking fabric that dries fast and are UPF50+ rated. The protective arm sleeves are constructed of a comfortable 4-way stretch material that does not restrict movement and allows a greater range of motion.

The secret to the high performance of the "powersafe" feature is the combination of sophisticated firmware and hardware features. Highly reliable tantalum capacitors that store energy while the SSD is in operation form the basis. In the event of a sudden power outage, the stored charge is used to safely write both dynamic data and data in the DRAM cache to the NAND flash array. Intelligent power management within the firmware ensures that the power supply disconnects from the host upon reaching a critical threshold and connects to the regulated voltage of the capacitors instead. This provides the SSD with sufficient power to safely execute write commands and flush cached data.

A spring-loaded plunger assembly securely locks the guard in a closed position whenever the guard is in the operating position. When released, the guard hinges up, allowing instant access. The guard is made from strong, injection, molded high impact polycarbonate which offers clear and safe vision through body and visor.

Mencom Hazardous Location Connectors series is designed to meet stringent electrical requirements for protection under Class I Division 2 environments and certified by Underwriters' Laboratories (UL). 'Class I' is defined as a hazardous location in which flammable gas or vapor may be present in sufficient quantities to be considered ignitable or explosive. 'Division 2' is defined as an area that is not likely to contain dangerous concentrations of flammable substances in closed containers. Common Class I Division 2 hazardous locations include refineries, utility gas plants, coal mines, and liquid-gas storage facilities.

VpCI®-337 is a waterborne Vapor phase Corrosion Inhibitor that can be applied by fogging into metal void spaces. This labor-saving technique uses a minimum of product to protect large areas or volumes. Vapor phase Corrosion Inhibitors in the fogging fluid diffuse throughout the void and are attracted to metal surfaces where they "condense" and form a protective molecular layer. This layer inhibits the corrosion reaction on the metal surfaces even in the presence of oxygen and residual moisture.