Walter has introduced the M2136, a multitooth close-pitch finishing cutter that features a high degree of process reliability coupled with superior cost effectiveness, particularly with cast iron, thanks in part to its eight cutting edges per insert. These stable, negative inserts promote not only stability but also ease of handling as well as leading to high levels of surface quality during the finishing process.
The inserts for the M2136 are available in two variants, the B67 and the D67. The B67, known as the "universal" one, is primarily aimed at medium and difficult machining conditions and produces maximum cutting-edge stability and high feed rates under these conditions. The D67, known as the "easy cutting" one, is suitable for universal applications and is well-suited for medium machining conditions.
The M2136 is available in diameters from 2 to 6 in. (50 to 160 mm) and is enhanced with Walter's Tiger·tec Silver coating in three CVD coated grades (WAK15, WKP25S and WKP35S). There is also one PVD coated grade.
(WKK25S). Additionally, the new cutter's Torx Plus screws promote good handling and high torque. The new M2136 supplants the older close pitch finishing cutter, the F4049.
High-temperature (1,000° C or higher), atmosphere-controlled process in which a chemical reaction is induced for the purpose of depositing a coating 2µm to 12µm thick on a tool’s surface. See coated tools; PVD, physical vapor deposition.
Tool-coating process performed at low temperature (500° C), compared to chemical vapor deposition (1,000° C). Employs electric field to generate necessary heat for depositing coating on a tool’s surface. See CVD, chemical vapor deposition.
Walter has introduced new PCBN grades for improved turning of hardened steel up to 65 HRC. These grades (WBH10C, WBH10 and WBH20) provide users with an array of benefits. High-quality surface finish due to unique new wiper geometry (MW2) and long tool life with the new TiAlSiN-coated grade (WBH10C…
Walter has announced the introduction of the TC117/TC217 Advance cut taps for high threading productivity in a wide range of different materials. The Advance lineup is one of the three categories to Walter threading tools.
Walter has added two new cast iron insert grades to its Perform Line family of turning tools, the WKV10 and WKV20. These new negative geometry grades are versatile, cost-effective inserts and are ideal for those who machine small or medium batch sizes. These new grades in the Perform Line…
Walter has added indexable inserts to the range of products available via the Walter Xpress fast delivery service. Previously the special custom solutions available with Walter Xpress had been limited to round tools and tools that hold indexable inserts.
Walter has introduced its next generation of milling tools: the Xtra·tec XT (Xtended Technology). Designed to achieve increased productivity and process reliability, this new generation of milling cutters is being launched with initial offerings of shoulder milling cutters and a facemilling cutter…
Walter has expanded its milling program with additions that allow the universal, square system inserts of its versatile M4000 milling line to be used in its F2010 program, which is a milling family that utilizes a replaceable and adjustable cartridge.
Walter has introduced the D3120, an indexable insert drill built to provide trouble-free drilling in virtually all conditions. It features square positive indexable inserts with four cutting edges, enabling it to reduce cost per cutting edge.
Walter has expanded its Tiger·tec Gold line of indexable inserts with the addition of the WMP45G grade made specifically to handle the challenges of turbine blade machining. The new WMP45G grade, available as round indexable inserts for the F2334R copy milling cutter, is for facemilling and copy…
Walter has introduced the DC150 Perform 5 × Dc drill, a versatile and cost-effective solid-carbide drill that can be used universally with all materials and with a broad range of workpieces. Like the others in the DC150 Perform Line, the new drill is suitable for use anywhere small and medium batch…
The Walter Cut MX grooving inserts deliver high levels of flatness and surface quality with their tangentially-mounted arrangement in the G3011/G3021 holders. Four cutting edges per insert multiply user productivity and, if one cutting edge breaks, the other cutting edges remain usable.
PRODUCTS
