Products

Electro-permanent magnets like the EMH can grip many different parts with no change over, making these end effectors more flexible than other designs. Electro-permanent magnets have high power density and compact size which improves the available payload for the robot to which it is mounted. Operation of electro-permanent magnets is energy efficient by design as the magnet uses power only when switching from active to inactive and does not consume power otherwise.

Used for both enlarging or finishing holes from a castings core pin condition, a major advantage of the Star Cutter core drills is that they are proven to cut straight holes that correct shifts in a cored hole location, which can occur during the casting process. These drills are also adept at preparing holes for a second pass in tight tolerance reaming, optimizing the hole size and location results.

In addition to the numerous new additions and special "First Choice" recommendations, the catalog features a range of practical information for cutters about Inovatools' INOSHOP (online shop), INOQR (QR code reader), INOCUT (cutting data computer) and INOCAM (CAM/XML interface) as well as a range of web, Android and iOS apps, providing users with instant and comprehensive information and allowing them to access the required tool and its data directly and with just a few clicks.

The advanced design of YG-1's FM10 PNMU inserts separates the cutting edge and the wiper, resulting in 10 true cutting edges. Another feature – the 36⁰ entry angle – successfully generates thinner chips, providing operators higher feed capabilities. The curved cutting ridge and wiper design is engineered to reduce cutting forces and directs these forces axially along the strength of the machining center into the spindle.

The Ruler3000 combines SICK's groundbreaking Ranger3 streaming camera with a Class 2 eye-safe laser, pre-selected optics and fixed geometries to enable much simpler configuration and commissioning. With industry-standard compliance giving comprehensive access to machine vision software tools, the Ruler3000 dramatically cuts time and complexity when integrating more demanding inspection, measurement, and robot guidance tasks across a wide range of industries.

RoboMate LaserEtch is an integrated laser system that can be added to the ANCA RoboMate loader for the TX and MX platforms, allowing laser marking of individual tools in-process. An automatic stand-alone laser marking station, the AutoMarkX is the latest addition to ANCA's family of tool production solutions. The operator simply loads up to two full pallets of tools and the robot performs the laser marking operations, freeing up staff to take care of other tasks in the factory.

The Torrent M sets the stage for a new generation of in-process or final clean ultrasonic cleaning systems that meet FDA 21 CFR Part 11 audit trail regulations and GAMP 5 recommendations while simplifying machine IQ and OQ validation in the most demanding Medical and Pharmaceutical applications.

The FW5 wiper geometries, with a new wiper curved cutting edge and V chip formation for short chips, can also be used on components with long overhangs thanks to the reduced cutting pressure. In addition, the MW5, with its longer cutting edge, is suitable for the highest feeds. The FW5 and MW5 are available on a variety of inserts. These new Walter geometries reduce machining time by increasing the feed by up to 300% while maintaining surface quality and can allow users to combine roughing and finishing operations using the same insert.

With its practical RTC6 EtherBox, SCANLAB has transformed the control electronics of laser machining systems into an easy-to-integrate 'click-in system'. The handy box, with a high-quality, powder-coated aluminum housing, can be attached to a standard DIN rail in a switch cabinet in a matter of seconds. It also has rubber feet for stability when used in a freestanding position.n

With the addition of a new multi-channel, low noise piezo driver, PI is expanding its offering of high precision piezo amplifiers for applications that require electronics to drive multi-axis piezo positioning stages or need a multiple channel high voltage source in a compact, economical design. PI's new E-413.x amplifier has bipolar operation with peak currents up to 100mA per channel at -250 to +250V. For OEM applications, compact modules are also available.n

The PRAB Bundle Breaker installs in a conveyor's in-feed hopper, where dual rotating cylinders agitate the material, shredding stringy wads of chips, turnings, and bundles apart to allow for effective processing in downstream equipment. The PRAB Bundle Breaker may be added to an existing conveyor or incorporated into a new PRAB metal scrap processing system.

With just a few clicks, users are guided through product selection, comparison tools, and complete technical information to quickly discern their needs from a variety of portfolio options. The Rexroth Store also provides pricing and estimated product lead times.