Products

A member of the Walk-A-Sured® Water Clear Epoxy System, this eco-friendly, two-component epoxy system meets OSHA and ADA standards, and ASTM slip-resistance requirements. It contains 100% solids, with no solvents or VOCs, ensuring compatibility with previously installed coatings. Water, solvent and chemical resistant Walk-A-Sured® Water Clear HEAVYDUTY 20 contains polymer grit which gives the coating long-lasting added traction. It is ideal for use on industrial floors by machining centers and other oil-prone areas, in auto service stations where oil and grease are common, in ski resorts where floors are normally wet, and other manufacturing/industrial/commercial environments. n

CoroPlus® Connected is used alongside the existing Silent Tools™ Plus, a digitally connected damped boring bar from Sandvik Coromant. Having been awarded first place in the International Manufacturing Technology Show (IMTS) Production Innovation contest in 2018, Silent Tools™ Plus helps customers by providing visibility at the cutting zone in internal turning applications with long overhang.

The P6006 insert can perform up to 10 x Dc without the need for a pilot drill. It features a protective chamfer on the insert with HIPIMS-PVD coating, and the wear resistant WPP25 grade which leads to maximum tool life in stable conditions. Further, the insert has a 100° prism for the contact point in the body, and a 140° point angle with new geometry and thinner web. Optimum wear detection is provided by its light-colored yellow coating.

The new Optoquick is well-suited for measuring transmission shafts where spline and gear features, such as OBR, ODB, pitch run-out, etc., need to be measured together with traditional measurement of the solid bearing portions. It combines a touch measuring sensor with non-contact optical scanning to provide rapid and accurate measurements while the part is rotating. Design to operate on the shop floor next to the machine, it helps speed up the work-in-progress operations and eliminates time wasted in moving parts across the shop floor.

With 3D printing, there is about a 30% reduction in tool weight, yet it has the equivalent torsional stiffness of a steel ground body tool. Lightweighting can play a big role in large, heavy tools that take a toll on the machine spindle, helping to reduce preventative maintenance. These improvements can be significant when producing aerospace and automotive components, including electric vehicle parts, where existing spindle interfaces are not always ideal for some of the size/weight of tools.

The M20 MILLTURN has a one piece, straight-lined appearance, with a modern, functional design. The continuous front made from hardened glass features an integrated display of performance data as well a sliding window to the tool magazine. The machine's fresh appearance is further supported by its new colouring. Optimum ergonomics as well as convenient, user-friendly operation round off the unique design.

The HiPACS drilling and countersinking system can be utilized on all machines typically used for aerospace applications. In less stable conditions such as robot end effectors, the diamond coated carbide drills offer excellent tool life and hole quality. PCD-tipped drills, on the other hand, excel in stable conditions such as gantry machines.

The tribo plain bearings made of high-strength filament fabric are used where very high loads occur. The extremely strong filament in its specially interwoven design ensures maximum resistance and enables a maximum permissible compressive strength of 400 MPa. The newly developed material was extensively tested on the indoor and outdoor test rigs in the 3,800 square-meter igus test laboratory.

The GROB Systems G350 Universal Machining Center delivers high productivity, optimum availability, and excellent maintenance access. What's more, it features a unique machine concept; three linear and two rotary axes permit 5-axis simultaneous machining and simultaneous interpolation. The machine's unique axis arrangement permits upside down machining, offering almost limitless possibilities for part machining. Meanwhile, the horizontal spindle position permits the longest possible Z-travel path and optimum chip fall.

ILME has several types of MIXO RJ45 adapters to meet the needs of industrial data transmission. The new MIXO RJ45 adapter (CX-01-J8UM) module is designed to accommodate a variety of RJ45 patch cords and drastically reduce the assembly time at the manufacturing site. The new RJ45 adapter is for fitted any RJ45 cord plugs with the maximum dimension, 34 mm (L) x 13.5 mm (W) x 9.5 mm (H). End users can simply place the patch cord into the adapter and secure it by the insulating latch: Click and Fix.

As more shops seek the benefits of a single setup, multiaxis cutting strategy, Mastercam 2022 adds new techniques and strategies such as the Unified Multiaxis toolpath which allows you to select multiple pieces of input geometry to generate the toolpath pattern. Using those geometry choices, the toolpath picks the best algorithm to calculate the path. Multi-pass on Deburr toolpaths supports flat chamfered and rounded edges which gives the user added flexibility, allowing the Deburr toolpath to create a quality surface finish on larger chamfered or radiused edges.n