Products

In the initial variant, which features a total of nine Ethernet ports, the C6027 is ideally suited as an IoT or security gateway for connecting different machine and system modules. The IPC is Microsoft Azure™ Certified and AWS qualified for use in cloud-based platforms.

ALTILUB 700, a high performance lubricant solution dedicated to the machining of super alloys. Featuring a unique and innovative lubricating phase, ALTILUB 700 demonstrates increased wettability and lubricity. It thus improves your cutting conditions while extending your tools life. Translucent and free of mineral oil, boron or allergenic bactericide, it contributes to the cleanliness of your parts and your production facilities.

The KONTEC KSC mini is the vise of choice for flexible use in efficient blank and finish part machining. Conversion on a larger clamping range is even possible without requiring additional accessories. Different jaw widths of 45 and 70 mm can be used on the same basic vise, allowing optimal adjustment to different clamping tasks.

A member of the Walk-A-Sured® Water Clear Epoxy System, this eco-friendly, two-component epoxy system meets OSHA and ADA standards, and ASTM slip-resistance requirements. It contains 100% solids, with no solvents or VOCs, ensuring compatibility with previously installed coatings. Water, solvent and chemical resistant Walk-A-Sured® Water Clear HEAVYDUTY 20 contains polymer grit which gives the coating long-lasting added traction.

CoroPlus® Connected is used alongside the existing Silent Tools™ Plus, a digitally connected damped boring bar from Sandvik Coromant. Having been awarded first place in the International Manufacturing Technology Show (IMTS) Production Innovation contest in 2018, Silent Tools™ Plus helps customers by providing visibility at the cutting zone in internal turning applications with long overhang.

The P6006 insert can perform up to 10 x Dc without the need for a pilot drill. It features a protective chamfer on the insert with HIPIMS-PVD coating, and the wear resistant WPP25 grade which leads to maximum tool life in stable conditions.

The new Optoquick is well-suited for measuring transmission shafts where spline and gear features, such as OBR, ODB, pitch run-out, etc., need to be measured together with traditional measurement of the solid bearing portions. It combines a touch measuring sensor with non-contact optical scanning to provide rapid and accurate measurements while the part is rotating.

With 3D printing, there is about a 30% reduction in tool weight, yet it has the equivalent torsional stiffness of a steel ground body tool. Lightweighting can play a big role in large, heavy tools that take a toll on the machine spindle, helping to reduce preventative maintenance.

The M20 MILLTURN has a one piece, straight-lined appearance, with a modern, functional design. The continuous front made from hardened glass features an integrated display of performance data as well a sliding window to the tool magazine. The machine's fresh appearance is further supported by its new colouring.

The HiPACS drilling and countersinking system can be utilized on all machines typically used for aerospace applications. In less stable conditions such as robot end effectors, the diamond coated carbide drills offer excellent tool life and hole quality. PCD-tipped drills, on the other hand, excel in stable conditions such as gantry machines.

The tribo plain bearings made of high-strength filament fabric are used where very high loads occur. The extremely strong filament in its specially interwoven design ensures maximum resistance and enables a maximum permissible compressive strength of 400 MPa. The newly developed material was extensively tested on the indoor and outdoor test rigs in the 3,800 square-meter igus test laboratory.