Products

Products • June 29, 2021

W4F Sensor

The next generation W4F with its highly rugged Vistal plastic housing offers sensor functions and performance characteristics that were previously only available in the larger W16 and W26 product families from SICK. The Blue Pilot operating concept has been implemented in the W4F. The next generation of miniature photoelectric sensors offer the same look and feel – a consistency that makes operating and commissioning sensors significantly easier for users.

Products • June 29, 2021

BioCorr HP

BioCorr HP is a new generation of BioCorr, Cortec's time-tested water-based and biobased rust preventative containing 54% USDA certified biobased content. It is designed to preserve metals in storage and during transportation. This ready to use product has excellent emulsion stability, contains no chemicals that interfere with automatic transmission fluids, provides multi-metal protection, and is an excellent environmentally sound alternative to petroleum-derived products due to its biobased content. It protects for up to two years of indoor storage or during shipments when combined with VpCI packaging materials.

Products • June 29, 2021

538 (537) Boring Cassette with 3ETECH Digital Display

Made of hardened steel, it is extremely robust and resistant to all external mechanical influences. It can be used on serrated tool bodies and Alu-Line slide tools in the diameter range from 3.937" – 128.15" (100 mm – 3255 mm). Additionally, this precision boring tool can be adjusted without the aid of the readout. Its diameter can be set via a vernier scale in 0.0001" (0.002 mm) increments. This new tool offers an excellent price/performance ratio with extreme accuracy and strength in any industry.

Products • June 25, 2021

Standard Type, F Type, R Type Chucks

To minimize machine downtime and provide operator safety, these Hydraulic Chucks use a simple hex wrench that requires only two to three turns for both clamping and unclamping. Tightening is complete when the clamping screw hits the bottom; controlling tightening torque is not needed. Once a Hydraulic Chuck is centered, the runout will not vary, even if a cutting tool is changed repeatedly. Runout of fewer than three microns at four times diameter can be achieved.

Products • June 24, 2021

T2710 Indexable Thread Mill

Walter's T2710 indexable thread milling cutter can be used universally in steels, stainless steels, cast iron, non-ferrous metals, high-temperature alloys, and hardened steels up to 55 HRC. It machines threads with nominal diameter from 0.79 in. (20 mm), and pitch range of 1.5 - 6 mm/18-6 TPI up to 1.5 x Dn thread depth. The tool is supplied with a Weldon shank for rigid and secure clamping.

Products • June 24, 2021

A-352 XY / XYZ Cartesian Gantry Systems

For applications requiring XYZ motion, a motorized vertical linear module can be added at the factory - voice coil motors, linear motors, and screw drive linear modules are available, all with counterbalance or break option. Customizations, such as stage base materials (granite, aluminum, etc), a steel base, or isolators as well as mounting platforms for vision systems, laser heads, galvos or dispensers, etc., are also available.

Products • June 23, 2021

Smart Function Kit for Handling

The Smart Function Kit for Handling can be used in a variety of areas, such as production handling, machine assembly and packaging. Pick-and-place tasks can also be performed quickly and cost-effectively, as a Cartesian multi-axis system for packages of different sizes, weights and formats. n

Products • June 23, 2021

X-ray CT

With the release of a new offset CT reconstruction algorithm in the latest version of the manufacturer's Inspect-X software, not only can larger components be scanned but it can also be performed at higher geometric magnification. The Offset.CT module is available on all Nikon Metrology X-ray CT systems from 180kV through to 450kV.

Products • June 23, 2021

TiNox-Cut End Mills

TiNox-Cut End Mills are made from premium ultra-fine micro grain solid carbide with a maximized transverse rupture strength for high impact applications, and produce impressive results compared to conventional end mills. Advanced PVD-applied multi-layered coatings withstand excessive heat and provide superb wear resistance for longer tool life, and tool geometry is designed to produce minimal vibration when machining tough materials.

Products • June 23, 2021

FZP Machine Line

The "lightest" machine in the FZP line is the new FZP32 with a working range of up to X = 10, Y = 4 and Z = 2.5 meters (393" x 157" x 98"). The user can machine block materials, plastics, as well as CFRP, GFRP and aluminum, among other materials. Due to the large working area, it is also possible to mill components completely without reclamping. "The modular design of the machine offers the possibility to consider different options.

Products • June 22, 2021

Alumigator ASR-5 End Mill

This revolutionary new end mill boasts an unequal indexing configuration that reduces chatter for the optimized high efficiency milling of Aluminum Alloys. Designed and engineered from the Alumigator family of high performance aluminum mills, the 5 flute configuration with polished flutes can achieve metal removal rates in excess off 100 cubic inches per minute. Staggered roughing serrations and proprietary gashing geometry ensure small chip size to enable more aggressive feed rates and depths of cut.

Products • June 22, 2021

ToolConnect Barcode Application

The ToolConnect barcode application uses a barcode scanner at the machine tool to scan the presetter generated barcode. ToolConnect reads and processes the barcode data, displays all tool and process information and then automatically updates the offsets to the correct fields in the control. No operator data entry is required.