Products

Products • May 15, 2021

FlexMove Helical Plain Bend Conveyors

FlexMove Helical Plain Bend Conveyors provide customers with unlimited configurations, including flat to flat; flat to incline or incline to flat; or incline to incline. These configurations, which also include inclines and declines through corners and straights, provide great flexibility for applications involving product buffering especially in corners. FlexMove Helical Plain Bend Conveyors also come with a patented side roller chain to reduce corner friction.

Products • May 15, 2021

EcoAir 325 Tool & Die Rust Preventative

EcoAir® 325 Tool & Die Rust Preventative has proved to be a great development for molders. This ready- to-use vegetable oil/solvent-based liquid is packaged in EcoAir® spray cans that rely on compressed air rather than traditional aerosol propellants. It is easy to atomize over a large surface area such as the interior of a plastic injection mold or die. Unlike other mold savers that have a reputation for clogging mold pores and must be cleaned off before use, EcoAir® 325 Tool & Die Rust Preventative does not have to be removed. This makes it extremely easy to bring a mold out of shipping or storage and put into use immediately.

Products • May 15, 2021

Mastercam Design

Mastercam Design streamlines and simplifies modeling and editing geometry. It also supports advanced geometry creation, including solid and surface modeling, hybrid machining, NURBS curves and surfaces, 2D and 3D associative dimensioning, surface extension, blending, trimming, splitting, variable filleting, and hybrid modeling to complete your jobs quicker and more efficiently.

Products • May 15, 2021

MunchMan Conveyor

The MunchMan uses primary and secondary belts installed at the lower curve and through the incline and chip discharge areas of the system. These belts run in unison to grab chips, compress them and carry them securely up steep inclines. This design eliminates the risk of conveyor jams that can occur when chip balls tumble at the lower curve or jam in the conveyor incline section.

Products • May 15, 2021

KCI/KBI 1300 Series Inductive Rotary Encoders

Each lightweight KCI 1319 / KBI 1335 encoder includes a 25 mm hollow shaft and inductive scanning technology that makes it insensitive to contamination and magnetic fields. The encoder communicates using the high speed EnDat 2.2 interface which also allows for additional information, such as temperature or diagnostics, to be communicated as well.

Products • May 12, 2021

Model 630XW3 with a 16-station wheel changer

This model is part of the GrindSmart® series of tool & cutter grinding machines with an axis configuration that incorporate 6 fully interpolated axes (3 rotary and 3 linear) and is unique in this industry. The machine also incorporates linear axis drive technology. n

Products • May 12, 2021

High-Torque and High-Speed Live Lathe Tools

Speeders improve surface finish and reduce cycle times when machining small holes and soft materials, without lengthy acceleration ramps. Reducers optimize the lower speed, higher torque requirements of large holes and tough materials without sacrificing horsepower. In-line holders utilize ER style collets and are available on extensions to machine between chuck jaws.

Products • May 11, 2021

V-308 Nanopositioning Slide

The closed-loop linear slide uses an optical position sensor with sub nanometer resolution and a voice coil linear motor to allow vertical (or horizontal) travel up to 7mm with a velocity up to 200mm/sec (8"/sec) for fast accurate scanning. Guided by low friction cross-roller bearings, this low-profile linear slide delivers long lasting performance in high duty cycle industrial applications. Ease-of-use is built in with a user-adjustable counterbalance, (e.g. for heavy, large NA microscope objective lenses up to 1kg in vertical applications) and hard stop adjustability to limit the travel range.

Products • May 11, 2021

9 x 20-inch Bench Engine Lathe

Due to its heavy cast iron construction, smooth power transmission and precision thrust and ball bearings in the head stock and spindle, the bench lathe provides years of trouble-free, precise turning. The Bench Lathe is the right choice for turning small metal parts.

Products • May 11, 2021

MC128 Advance and MD128 Supreme

The MC128 Advance boasts a wide diameter range of 1/4 -3/4 in. (2-25 mm) with a TiAIN coating for universal use. WJ30TF grade is available for ISO materials P, M, K, and S. The MC128 Advance is well suited for die and mold work as well as general metalworking. The MD128 Supreme provides 64% more tool life when compared to similar competitive cutters. It is a close pitch cutter providing maximum productivity thanks to more teeth, a longer cutting-edge length and material-specific grades.

Products • May 11, 2021

Machine vision with HALCON 21.05

A major highlight in the new HALCON 21.05 version is the Generic Shape Matching feature, which makes MVTec's industry-proven shape matching technologies even more user-friendly and future proof. Users can now implement their solutions much faster and more easily, thanks to a significant reduction in the number of operators required. Moreover, thanks to the unification of HALCON's different shape matching methods into a single set of operators, users can now integrate new shape-matching-related features more easily.

Products • May 8, 2021

iShield Camera

In addition to the microSD card, the solution includes the 'iShield Camera Card Tool' (iCCT) software, which is a free download from the Swissbit website. With iCCT, the card's security settings are activated via the computer before it is used for the first time. The user PIN is also set here. The card is then ready to deploy and will reliably capture all recorded camera data. iShield Camera supports Loop Recording, where a camera deletes the oldest recordings to make room for new data.n