Products

As the most recent addition to the T-A Pro high-penetration drilling system, this insert demonstrates that the best just keeps getting better. Not only are the faster penetration rates maintained, but in using the redesigned body of the T-A Pro, maximum coolant flow and excellent rigidity are also present when utilizing the high-speed steel geometry.

ESPRIT TNG now also enables manufacturers to perform face-milling operations with a unique "roll-in" lead-in strategy recommended by Sandvik Coromant to improve surface quality, reduce cycle time, and extend tool life.

M213 STREAKERS feature three extremely large flute cavities, uniquely designed end face and gashing, and 37-degree helixes to achieve deep cuts and high feed rates.

FlexMove Helical Plain Bend Conveyors provide customers with unlimited configurations, including flat to flat; flat to incline or incline to flat; or incline to incline. These configurations, which also include inclines and declines through corners and straights, provide great flexibility for applications involving product buffering especially in corners.

EcoAir® 325 Tool & Die Rust Preventative has proved to be a great development for molders. This ready- to-use vegetable oil/solvent-based liquid is packaged in EcoAir® spray cans that rely on compressed air rather than traditional aerosol propellants. It is easy to atomize over a large surface area such as the interior of a plastic injection mold or die.

The MunchMan uses primary and secondary belts installed at the lower curve and through the incline and chip discharge areas of the system. These belts run in unison to grab chips, compress them and carry them securely up steep inclines.

Each lightweight KCI 1319 / KBI 1335 encoder includes a 25 mm hollow shaft and inductive scanning technology that makes it insensitive to contamination and magnetic fields. The encoder communicates using the high speed EnDat 2.2 interface which also allows for additional information, such as temperature or diagnostics, to be communicated as well.

This model is part of the GrindSmart® series of tool & cutter grinding machines with an axis configuration that incorporate 6 fully interpolated axes (3 rotary and 3 linear) and is unique in this industry.

Speeders improve surface finish and reduce cycle times when machining small holes and soft materials, without lengthy acceleration ramps. Reducers optimize the lower speed, higher torque requirements of large holes and tough materials without sacrificing horsepower. In-line holders utilize ER style collets and are available on extensions to machine between chuck jaws.

The closed-loop linear slide uses an optical position sensor with sub nanometer resolution and a voice coil linear motor to allow vertical (or horizontal) travel up to 7mm with a velocity up to 200mm/sec (8"/sec) for fast accurate scanning.

Due to its heavy cast iron construction, smooth power transmission and precision thrust and ball bearings in the head stock and spindle, the bench lathe provides years of trouble-free, precise turning. The Bench Lathe is the right choice for turning small metal parts.

The MC128 Advance boasts a wide diameter range of 1/4 -3/4 in. (2-25 mm) with a TiAIN coating for universal use. WJ30TF grade is available for ISO materials P, M, K, and S. The MC128 Advance is well suited for die and mold work as well as general metalworking.