Products

Products • May 5, 2021

MITI MAXX

ITI's "MITI MAXX" is a robust, yet mobile automation system that utilizes the durable Fanuc CRX-10iA collaborative robot that meets RIA safety standards and doesn't require fencing. MITI MAXX's simple interface allows it to be integrated to almost any machine controller. Even if you have hi-mix, low-volume applications, the MITI MAXX is affordable, plug and play self-automation that will maximize your resources and reduce costs.

Products • May 5, 2021

SuperTurnZ

It represents a highly productive alternative to conventional turning where 80° & 35° corner inserts are fed in the same direction, and instead utilizes all 4 directions available on conventional 2 axis lathe (+Z, -Z, +X, -X) to maximize material removal. The double-sided positive SuperTurnZ inserts have the same axial & radial rake angle and capability as standard ISO positive inserts, allowing for low cutting forces, but with double the cutting edges and much higher feed rate capabilities.

Products • May 4, 2021

AF160 Hobbing Machine

The AF160 can process parts with an outside diameter of up to 60mm and a length of 250mm. The machining length is between 110 and 180mm. The eight axes – all of them independent – make the AF160 the most flexible Affolter machine to date. It can produce straight gears, helical gears, straight bevel gears, face gears, straight or helical crowned gears, worm screws, worm wheels, cylkro gears, and internal gears. Power skiving, the milling of worms and shafts, as well as chamfering is possible, too.

Products • May 4, 2021

Sinamics G115D Distributed Drive System

The Sinamics G115D drive system is characterized by a robust design with a high IP protection class (up to IP66 / UL Type 4X) and is suitable for use in harsh environments. Thanks to its compact dimensions, the Sinamics G115D can be easily installed in confined areas. The drive system can also be operated reliably over a wide temperature range of -30 to 55 degrees Celsius (-22 to 131 degrees Fahrenheit), enabling operation in deep freezing applications.

Products • May 4, 2021

KR 6 SCARA Robot

For maximum acceleration and velocity, KUKA's optimal motion planning software calculates and sets the correct motion path to ensure that all the robot's axes can finish moving simultaneously at the desired point in space. In electronics applications, there is little need for changes in part orientation, so necessary robot moves are up, down and inserting. It is for this reason that the KR 6 is simple and easy to use, as well as light weight and extremely fast.

Products • May 4, 2021

A-523 Z-Tip-Tilt

The compact format provides a rotation range up to 2° in theta-X / theta-Y and 5mm vertical (Z travel) range with excellent dynamics (up to 1g acceleration). The 250mm diameter (10") platform can carry loads of 8kg (~18lbs), while the low profile of only 60mm (2.4") keeps the center of gravity down, a great advantage in dynamic applications. The A-523 can be combined with the A-361 X-Y-θ Air Bearing Alignment Stage to form a very compact and low profile 6-axis precision motion system.

Products • May 1, 2021

130mm Double-Acting Hydraulic Vise

Jergens' 130mm hydraulic vise offers users the ability to position the jaws just outside of the dimension of the workpiece to minimize travel when clamping. This, in combination with the speed of hydraulic workholding, reduces clamping and unclamping operations to about one second. The ease of use of these double-acting vises allows users to repeat these time-saving operations, adding up to measurable machine uptime and productivity increases, especially for high mix, low volume manufacturers.

Products • May 1, 2021

Merlin Plus Standalone Software

Merlin Plus software offers multiple measurement and statistical displays with numeric and graphic layout, trend limits, data traceability, batch management, part counters, and data storage; exporting in CSV or Q-DAS format. It can handle up to 250 different measurements, 1,000 different part programs and offers connection to several type of devices with built-in drivers.

Products • May 1, 2021

ECM 2400 Encoder

The ECM 2400 encoders are available with EnDat 2.2 interface. In conjunction with a safe control, they can be used as single-encoder systems in applications with control category SIL 2 (as per EN 61508) and with Performance Level "d" (as per EN ISO 13849). The fault exclusion that is implemented in its design has been tested and is ensured under the specified operating conditions.

Products • May 1, 2021

1-3/8″ PMIN Power Series Field Wireable Connectors

Mencom's new field wireable connectors are UL listed and provide IP69 protection. They are available in 3-pole and 4-pole with straight and right-angle orientations. Mencom is the industry's first electrical connector manufacturer to design and produce a right-angled version of the 1 3/8" field wireable connector. The right-angle profile is lower than the typical bend radius needed to mount a straight cable, providing a big advantage when installation space is limited. Also, it removes undesirable cable strain caused by bending cables to fit in tight spaces.

Products • May 1, 2021

ScanGrid2 Safe Multibeam Scanner

The scanGrid2 safely detects objects of a variety of sizes within the freely configurable protective field zones, can evaluate multiple fields, and can execute configurable monitoring cases. A warning field zone extending up to four meters beyond the safe working range can be employed for non-safety actions.

Products • May 1, 2021

PJ-Plus Profile Projector Series

PJ-Plus is a series of profile projectors that utilize LED lighting and provides reliable measurements in manufacturing site environments. The PJ-Plus provides stable dimension and angle measurements in harsher environments conventional models can't handle, such as manufacturing and processing lines.n