Products

Products • May 8, 2021

iShield Camera

In addition to the microSD card, the solution includes the 'iShield Camera Card Tool' (iCCT) software, which is a free download from the Swissbit website. With iCCT, the card's security settings are activated via the computer before it is used for the first time. The user PIN is also set here. The card is then ready to deploy and will reliably capture all recorded camera data. iShield Camera supports Loop Recording, where a camera deletes the oldest recordings to make room for new data.n

Products • May 8, 2021

OptoFlash XS60

The speed and precision of the OptoFlash enables 100+ static measurements on parts up to 60mm in length and 20 mm in diameter within two seconds at U95 = 1 µm + D/200 (D in mm) with the ability to switch from one-part type to another with just one click (flexible gauge). It captures images of the component over the 360° degrees, automatically combining several images to determine both part optical axis and measurements of the features.n

Products • May 8, 2021

FANUC RoboCut α- CiC Series

The next generation of the RoboCut features innovative technology, making it the most productive wire EDM machine on the market. Constructed for ultimate rigidity, the advanced EDM machines minimize the amount of distortion embedded into each part. New discharge devices, powered by the SF3 power supply, improve surface roughening capabilities while maintaining high cutting speeds.

Products • May 8, 2021

MS Geometry Insert

The drill´s »X»-shaped pocket, and tapered seat provide stability in challenging applications while making it easy to change out the insert without disassembling the body from the holder. These key design features reduce unstable cutting conditions experienced with other drills commonly available in the market today, while enabling higher penetration rates and reducing overall machine set up times and costs.

Products • May 6, 2021

FBX Drill

The FBX drill is part of a tooling concept specifically developed to maximize metal removal rates and decrease cycle times when machining aerospace structural components. Quickly removing large amounts of material remains a challenge for these types of components. Traditionally, the first process step is to enter the material by using ramping techniques. This is a time-consuming process and low metal removal rates are the norm.

Products • May 6, 2021

ROS 2 Package

Doosan Robotics strategically designed its ROS 2 Foxy package to provide both convenience and accessibility. As the package is compatible with Doosan Robot Language (DRL), operators of Doosan robots with only standard ROS knowledge can easily create intelligent robotics application. The package is expected to accelerate the development of robot applications in various fields, including gripper, mobile robot integration, and multi-robot control in addition to existing controls.

Products • May 5, 2021

MITI MAXX

ITI's "MITI MAXX" is a robust, yet mobile automation system that utilizes the durable Fanuc CRX-10iA collaborative robot that meets RIA safety standards and doesn't require fencing. MITI MAXX's simple interface allows it to be integrated to almost any machine controller. Even if you have hi-mix, low-volume applications, the MITI MAXX is affordable, plug and play self-automation that will maximize your resources and reduce costs.

Products • May 5, 2021

SuperTurnZ

It represents a highly productive alternative to conventional turning where 80° & 35° corner inserts are fed in the same direction, and instead utilizes all 4 directions available on conventional 2 axis lathe (+Z, -Z, +X, -X) to maximize material removal. The double-sided positive SuperTurnZ inserts have the same axial & radial rake angle and capability as standard ISO positive inserts, allowing for low cutting forces, but with double the cutting edges and much higher feed rate capabilities.

Products • May 4, 2021

AF160 Hobbing Machine

The AF160 can process parts with an outside diameter of up to 60mm and a length of 250mm. The machining length is between 110 and 180mm. The eight axes – all of them independent – make the AF160 the most flexible Affolter machine to date. It can produce straight gears, helical gears, straight bevel gears, face gears, straight or helical crowned gears, worm screws, worm wheels, cylkro gears, and internal gears. Power skiving, the milling of worms and shafts, as well as chamfering is possible, too.

Products • May 4, 2021

Sinamics G115D Distributed Drive System

The Sinamics G115D drive system is characterized by a robust design with a high IP protection class (up to IP66 / UL Type 4X) and is suitable for use in harsh environments. Thanks to its compact dimensions, the Sinamics G115D can be easily installed in confined areas. The drive system can also be operated reliably over a wide temperature range of -30 to 55 degrees Celsius (-22 to 131 degrees Fahrenheit), enabling operation in deep freezing applications.

Products • May 4, 2021

KR 6 SCARA Robot

For maximum acceleration and velocity, KUKA's optimal motion planning software calculates and sets the correct motion path to ensure that all the robot's axes can finish moving simultaneously at the desired point in space. In electronics applications, there is little need for changes in part orientation, so necessary robot moves are up, down and inserting. It is for this reason that the KR 6 is simple and easy to use, as well as light weight and extremely fast.

Products • May 4, 2021

A-523 Z-Tip-Tilt

The compact format provides a rotation range up to 2° in theta-X / theta-Y and 5mm vertical (Z travel) range with excellent dynamics (up to 1g acceleration). The 250mm diameter (10") platform can carry loads of 8kg (~18lbs), while the low profile of only 60mm (2.4") keeps the center of gravity down, a great advantage in dynamic applications. The A-523 can be combined with the A-361 X-Y-θ Air Bearing Alignment Stage to form a very compact and low profile 6-axis precision motion system.