Products

This compact model, measuring a mere 49mm/54mm in length and the central bore hole with a diameter of 37.5mm/ 46.5mm, provides technicians with the flexibility and user-friendliness necessary for carrying out application tests on automotive parts, such as coaxial transmissions or gearboxes.n

The F-800 series is available in various capacities from 2 to 64 GB and is characterized by low power consumption and low heat generation. Sophisticated firmware functions for active and passive data maintenance and the protection against data loss in the event of power failure ensure reliable data retention.

WBH20 is a grade well suited for ISO-H Group of material such as for hard turning applications. WBS10 is well suited for ISO-S materials, specifically nickel-based (such as Inconel), iron-based (such as Udimet) or cobalt-based (such as Hayens).

As part of the well-known MCS10 series, this latest version features capacities double the size of the previous version, making it suitable for nominal loads of 40 kN for Fx/Fy, 200 kN for Fz, 3.5 kNm for Mx/My and 3.0 kNm for Mz.

With the new S-250(u) and C-350 cards, Swissbit has extended the long-term availability of its robust and durable storage media to a total of almost 20 years. While NAND flash products usually have a short availability due to relatively rapid innovation cycles, Swissbit meets the critical requirements of industrial embedded systems with long life cycles through these special products.

These tools, from clearance calculation to wall thickness analysis, form a comprehensive combination of complementary functions for digital product development - something otherwise reserved for expensive CAD systems.

The launch of the new DX4 servo drive and MX servo motor series expands Trio's machine solution and now makes it faster and easier for OEMs to utilize the high performance motion control available from Trio's range of Motion Coordinators.

The GEMVM system measures acceleration in up to three axes (depending upon sensor type) with a measuring frequency of up to 5.6kHz and a sampling rate of 25kHz. It has eight definable and selectable operating modes with five freely activatable static alarms.

PI's closed-loop piezo system handles the motion part in the TERA-print TERA-Fab™ E series platform. The piezo XYZ stage precisely moves the substrate under the beam pen array between light exposures and enables rapid reconstruction of an arbitrary, high-resolution pattern - up to 100,000s of sub-250nm pixels at a time.

The TiM240 is the first variant in the TiM2xx series and has an enclosure rating of IP65 for indoor use. The TiM240 scans a 240° area up to 10m away at speeds up to 15 times per second.

GC4415 and GC4425 are ideal for manufacturers operating in mass and batch production setups machining low-alloyed (P 2.1 to 2.6) and unalloyed (P 1.1 to 1.5) steels, respectively. Grade GC4425 has been shown to outperform competing inserts in a majority of steel turning applications.