Products

Products • December 3, 2020

Artis GEMVM System

The GEMVM system measures acceleration in up to three axes (depending upon sensor type) with a measuring frequency of up to 5.6kHz and a sampling rate of 25kHz. It has eight definable and selectable operating modes with five freely activatable static alarms. Any events that violate the predefined hard stop limits are logged in the event memory with relevant information for later analysis.n

Products • December 3, 2020

XYZ Piezo Stage

PI's closed-loop piezo system handles the motion part in the TERA-print TERA-Fab™ E series platform. The piezo XYZ stage precisely moves the substrate under the beam pen array between light exposures and enables rapid reconstruction of an arbitrary, high-resolution pattern - up to 100,000s of sub-250nm pixels at a time. The nanopositioning mechanism is actuated by special multilayer piezo stacks whose ceramic encapsulation provides protection against humidity and moisture, important in bio-chemical applications.

Products • December 3, 2020

TIM2XX LiDAR Sensor

The TiM240 is the first variant in the TiM2xx series and has an enclosure rating of IP65 for indoor use. The TiM240 scans a 240° area up to 10m away at speeds up to 15 times per second. This allows the user to cover a relatively large space (200m2) with one scanner and to quickly transmit any measurement changes to the controller via Ethernet. The tried-and-proven HDDM+ technology guarantees the stable and reliable output of measurement data. The low power consumption of 2.9 watts becomes a particular advantage when used in battery-operated vehicles.n

Products • December 3, 2020

GC4415 and GC4425 Carbide Inserts

GC4415 and GC4425 are ideal for manufacturers operating in mass and batch production setups machining low-alloyed (P 2.1 to 2.6) and unalloyed (P 1.1 to 1.5) steels, respectively. Grade GC4425 has been shown to outperform competing inserts in a majority of steel turning applications. It features improved wear, heat resistance and toughness, which significantly expands the application range. Both it and GC4415 can be used from finishing to roughing in applications with continuous cuts and light interruptions.n

Products • December 3, 2020

CARTO 4.2 Software Suite

XM-60 has become the market leading solution for direct measurement of all six degrees of freedom (linear, vertical and horizontal straightness, pitch, yaw and roll) on any form of linear axis. With the addition of the new XM-60 long range measurement functionality in CARTO 4.2, unlimited measurement range is now possible for the first time. n

Products • December 2, 2020

5074A Digital Charge Amplifier

The 5074B also comes with two features that deliver major operational improvements. The new amplifier is ready to operate within around six seconds, as compared to the previous time of 30 seconds for each startup procedure – so users save valuable time. This improvement has a direct impact on plant availability, especially for modular plants with swappable hot-plug modules. Another innovation: the two energy paths in the M8 connectors are now separated so that additional standard devices can be connected as per the industry standard without extra considerations.

Products • December 2, 2020

52/96 Workholding Technology for CNC Machining

The Mate 52/96 workholding system includes QuickSpecs™, Mate's unique product identification system. QuickSpecs allows real-time access to critical user data, CAD models and potential integration into business systems. Additionally, the product supports common robotic interfaces and palletizing systems to support factory automation.

Products • December 2, 2020

#9680176 Deluxe Vertical Turret Milling Machine

The Turret Milling Machine guarantees rigidity for a lifetime of vibration free accuracy due to the extra fine Meehanite castings. The machine's long term reliability and precision are the result of high quality components and expertly crafted construction.n

Products • December 2, 2020

RESOLUTE Encoders

The encoders are offset and coupled directly to the drive, as the motors are very small. A motor has a rotor and a stator component, so what we do is couple the ring to the rotor component. As the motor starts to spin, it accurately rotates the ring with respect to the encoder readhead, which is placed outside the entire mechanism. The beauty of the radar application is that the RF energy propagates in free space through the bore of each motor.

Products • December 2, 2020

HF-5 Hose Band Marking Fixture

The clever design features 5 rows of clamping with 12 "fingers" on each row that flex and conform to part dimensional variations as well. One toggle lever clamps all five bands and draws them down securely for the dot peen marking operation. Custom configurations and pneumatic powered designs are also available.

Products • December 1, 2020

No. 1054 500°F (260°C) Top-Loading Oven

The Grieve top-loading oven features 6" insulated walls, 16-gauge aluminized steel interior and a bottom reinforced for 800 lb. capacity. Additional features include a heat chamber mounted below the workspace and a pneumatic "L" shaped door.n

Products • December 1, 2020

TURNPWR Control

On the new TURNPWR, a 12.1" high-resolution display boasts a screen layout that is clearly arranged and user friendly. Preview graphics in the editor illustrate the individual machining steps for programming the contour as well as corresponding tool path generated using only dimensions pulled from a production drawing. It also accepts DXF files.