Products

The 2-jaw module can handle turning applications up to 1,500 RPM. Due to its compact profile, it is the perfect alternative to large and heavy centric vises. The 2-jaw and 3-jaw module use the HAINBUCH collet chuck as their base. Change-over is possible without removing the collet chuck and realignment thanks to HAINBUCH's Centrex quick-change interface.n

Electrostatic or mechanical filtration systems with an efficiency factor of over 99.9% improve production conditions by reliably protecting employees in their places of work. Reusuable, low-maintenance filter elements increase the sustainability and cost effectiveness for the entire production chain.n

The MC025 Advance is available in diameters from 1/8-1 in. (1-25 mm). A single grade is offered for universal applications for steel, stainless steel, cast iron and materials with difficult cutting properties as well as its ability to lower inventory costs.The MD025 Supreme solid carbide milling cutter boasts a high number of teeth for maximum productivity and high-feed face geometry. It is ideal for use on complex components.

SintoGrind HSS-X 1400 is suitable for flute-, thread-, profile-, internal and external cylindrical grinding of steel materials such as HSS, PM and medical steels. SintoGrind HSS-X 1400 is low foaming, prevents surface burning, inhibits burr development, is low misting and offers excellent filterability.

The diamond PCBN inserts deliver high-precision performance and excellent surface finish in materials including hardened and heat-treated steels up to 72 HRc, high speed steel (HSS), high alloyed steels hardened to 45 HRc and higher, super Ni based alloys, grey cast iron, ductile, and graphite.

The MQ150SU is a sealed unit version of the company's popular MQ150, featuring an internal synthetic lubrication system and grease packed bearings for long life and operation in any position. The feed unit uses a ball screw on the center line of a hardened, precision, 55mm diameter quill. It is precision ground, pre-loaded with zero backlash. An involute spline driven spindle uses EP7 high precision bearings and the unit features an HSK-32C Spindle nose supplied connection with clamping cartridge assembly.n

Stainless steel assembly pins from the GN 2342 series are available in all common diameters from 8 to 20 millimeters and in various standardized lengths. Three different end washer forms and the selection by means of a specific code number between assembly pin with and without transverse spring cotter pin holes diversify the series even further.n

The new HAIMER Face Shield that helps to minimize the spread of illnesses while being extremely comfortable to wear. The adjustable visor is made of high quality plastic which allows for repeatable use. Because of this, the product is sustainable and environmentally friendly through easily replaceable visors and head cushions. It also fulfills PSA Regulation (EU) 2016/425 category II, respectively requirements of eye protection according to EN 166:2001, ANSI/ISEA Z87.1-2020, CSA Z94.3:20 to protect against droplets and splashes (partly applied). n

Made in the USA, both VFD kits are also suited for smaller garage/machine shops, mills, lathes, and grinders. Adaptable to most applications, the VFD kits can run the motor on 220V single-phase incoming power vs. requiring three-phase power – eliminating the need for a phase converter convenient package, it can go up to 5,000 RPMs in high gear–10-15% higher than the standard milling machine could do. Unlike early VFD kits, these provide full-torque at the lowest RPM.

The Bantam Tools Desktop CNC Milling Machine is fast, easy to set up, and omes with software that allows for predictable outcomes, including automatic material location, effectively bringing aluminum prototyping to an accessible and affordable level that has not been seen in this category. Bantam Tools Milling Machine Software also supports a simple drag-and-drop integration with SVG files for 2.5D designs.n

Tangentially mounted grooving insert with a robust seating surface also ensures maximum stability. The insert and pocket design features an axial key stop for added stability against the side cutting (axial) forces. Precision cooling on the flank surface is offered as a standard feature for longer tool life. The chip breaker for the inserts is developed for heavy-duty machining to ensure short chips when cutting at maximum depth and when widening the grooves. n

The milling machines produce more parts, faster and with better tolerances than standard manual machines. In addition, they are simple to set up and operate. Another key feature is the Fagor Automatic controls that offer the most cost-effective solution in chip making profitability. This combination ensures faster programming, set-up and machining.