Products

Products • July 16, 2020

Face Shield

The new HAIMER Face Shield that helps to minimize the spread of illnesses while being extremely comfortable to wear. The adjustable visor is made of high quality plastic which allows for repeatable use. Because of this, the product is sustainable and environmentally friendly through easily replaceable visors and head cushions. It also fulfills PSA Regulation (EU) 2016/425 category II, respectively requirements of eye protection according to EN 166:2001, ANSI/ISEA Z87.1-2020, CSA Z94.3:20 to protect against droplets and splashes (partly applied). n

Products • July 10, 2020

VFD & VFD Plus Kits

Made in the USA, both VFD kits are also suited for smaller garage/machine shops, mills, lathes, and grinders. Adaptable to most applications, the VFD kits can run the motor on 220V single-phase incoming power vs. requiring three-phase power – eliminating the need for a phase converter convenient package, it can go up to 5,000 RPMs in high gear–10-15% higher than the standard milling machine could do. Unlike early VFD kits, these provide full-torque at the lowest RPM.

Products • July 8, 2020

Desktop CNC Milling Machine

The Bantam Tools Desktop CNC Milling Machine is fast, easy to set up, and omes with software that allows for predictable outcomes, including automatic material location, effectively bringing aluminum prototyping to an accessible and affordable level that has not been seen in this category. Bantam Tools Milling Machine Software also supports a simple drag-and-drop integration with SVG files for 2.5D designs.n

Products • July 3, 2020

Walter Cut G2016-P/ UX Grooving System

Tangentially mounted grooving insert with a robust seating surface also ensures maximum stability. The insert and pocket design features an axial key stop for added stability against the side cutting (axial) forces. Precision cooling on the flank surface is offered as a standard feature for longer tool life. The chip breaker for the inserts is developed for heavy-duty machining to ensure short chips when cutting at maximum depth and when widening the grooves. n

Products • July 3, 2020

CNC Vertical Turret Milling Machines

The milling machines produce more parts, faster and with better tolerances than standard manual machines. In addition, they are simple to set up and operate. Another key feature is the Fagor Automatic controls that offer the most cost-effective solution in chip making profitability. This combination ensures faster programming, set-up and machining.

Products • July 3, 2020

TetraMini-Cut 4-Edged Grooving Insert Line Expanded

This expansion includes two new TCL18 inserts with 1.75 mm and 2.5 mm thicknesses, expanding the existing line of 1.5 mm, 2.0 mm, and 3.0 mm inserts. The inserts are available in grade AH7025, a nano-multilayer PVD coating with high-aluminum content that provides hardness and adhesion to the grade for better process security during grooving operations.

Products • July 3, 2020

Double Turbo Square Shoulder Mills and Inserts

This system features a highly accurate geometry with the most positive helix angle possible to reduce the likelihood of surface mismatches and enable impressive 90-degree angle accuracy. With such precision, finishing cycle times are significantly shortened or, in some cases, completely eliminated. Double Turbo cutters are available in 19 metric variants ranging from diameter 40 mm to 125 mm and 16 inch variants ranging from 1.50" to 5".n

Products • July 3, 2020

Engraving tools tipped with PCD or CBN

PCD- and CBN-tipped engraving tools are offered in standard or customized dimensions; as semi-finished or finished (incl. side-cut); with highest reachable surface qualities.

Products • July 1, 2020

Corner Canopy Hoods

The canopy hood is molded one piece seamless of advanced composite resins that have superior chemical and corrosion resistance, are flame retardant and lightweight for a NO RUST guarantee. The corner canopy can either be wall mounted or suspended from the ceiling and can be equipped with optional side wall panels to prevent cross drafts from affecting the containment of fumes. Standard wall and island canopy hoods are also available both in composite resin and stainless steel.

Products • July 1, 2020

STC-MTV Five-Axis Mill-Turn Machining Centers

The two new machines, models MTV 1000 and MTV 1250 offering 8,000 rpm/700 ft lbs. of torque and 4,500 rpm/1,200 ft lbs. plus 200 bar/3,000 psi high pressure coolant for integrated turning, are joining the STC-MTV family of horizontal machining centers.

Products • June 30, 2020

SX-38 Type B

The capability to keep eighty tools resident with high horsepower motors means heavy metal removal and flexibility. B-axis surfacing with up to 135 travel handles up to ½" diameter tooling. Software technologies increase effectiveness including Star CNC's HFT (High Frequency Turning) software handle chip control in tough materials, Star CNC Motion Control System optimizes your program to reduce cycle time, and the Star Monitoring and Operator Support System (SMOOSS-i) allows remote monitoring with real-time efficiency reporting and operator intervention predictability.

Products • June 29, 2020

SimpliVac

The SimpliVac Vacuum optimizes sample impregnation in a faster more automated way and also allows lab technicians to set multiple cycles to complete the mounting process faster. SimpliVac can also accommodate larger samples due to its oversized chamber and sample tray insert, which creates a large flat surface for larger mounts. The integrated turntable allows for bi-directional movement of the samples when aligning, and seeing within the large chamber is easy as it has a large clear lid, thus allowing for simple alignment of samples when pouring. It also has locking controls that prevent inconsistent samples due to user error.