Products

Stainless steel assembly pins from the GN 2342 series are available in all common diameters from 8 to 20 millimeters and in various standardized lengths. Three different end washer forms and the selection by means of a specific code number between assembly pin with and without transverse spring cotter pin holes diversify the series even further.n

The new HAIMER Face Shield that helps to minimize the spread of illnesses while being extremely comfortable to wear. The adjustable visor is made of high quality plastic which allows for repeatable use. Because of this, the product is sustainable and environmentally friendly through easily replaceable visors and head cushions. It also fulfills PSA Regulation (EU) 2016/425 category II, respectively requirements of eye protection according to EN 166:2001, ANSI/ISEA Z87.1-2020, CSA Z94.3:20 to protect against droplets and splashes (partly applied). n

Made in the USA, both VFD kits are also suited for smaller garage/machine shops, mills, lathes, and grinders. Adaptable to most applications, the VFD kits can run the motor on 220V single-phase incoming power vs. requiring three-phase power – eliminating the need for a phase converter convenient package, it can go up to 5,000 RPMs in high gear–10-15% higher than the standard milling machine could do. Unlike early VFD kits, these provide full-torque at the lowest RPM.

The Bantam Tools Desktop CNC Milling Machine is fast, easy to set up, and omes with software that allows for predictable outcomes, including automatic material location, effectively bringing aluminum prototyping to an accessible and affordable level that has not been seen in this category. Bantam Tools Milling Machine Software also supports a simple drag-and-drop integration with SVG files for 2.5D designs.n

Tangentially mounted grooving insert with a robust seating surface also ensures maximum stability. The insert and pocket design features an axial key stop for added stability against the side cutting (axial) forces. Precision cooling on the flank surface is offered as a standard feature for longer tool life. The chip breaker for the inserts is developed for heavy-duty machining to ensure short chips when cutting at maximum depth and when widening the grooves. n

The milling machines produce more parts, faster and with better tolerances than standard manual machines. In addition, they are simple to set up and operate. Another key feature is the Fagor Automatic controls that offer the most cost-effective solution in chip making profitability. This combination ensures faster programming, set-up and machining.

This expansion includes two new TCL18 inserts with 1.75 mm and 2.5 mm thicknesses, expanding the existing line of 1.5 mm, 2.0 mm, and 3.0 mm inserts. The inserts are available in grade AH7025, a nano-multilayer PVD coating with high-aluminum content that provides hardness and adhesion to the grade for better process security during grooving operations.

This system features a highly accurate geometry with the most positive helix angle possible to reduce the likelihood of surface mismatches and enable impressive 90-degree angle accuracy. With such precision, finishing cycle times are significantly shortened or, in some cases, completely eliminated. Double Turbo cutters are available in 19 metric variants ranging from diameter 40 mm to 125 mm and 16 inch variants ranging from 1.50" to 5".n

PCD- and CBN-tipped engraving tools are offered in standard or customized dimensions; as semi-finished or finished (incl. side-cut); with highest reachable surface qualities.

The canopy hood is molded one piece seamless of advanced composite resins that have superior chemical and corrosion resistance, are flame retardant and lightweight for a NO RUST guarantee. The corner canopy can either be wall mounted or suspended from the ceiling and can be equipped with optional side wall panels to prevent cross drafts from affecting the containment of fumes. Standard wall and island canopy hoods are also available both in composite resin and stainless steel.

The two new machines, models MTV 1000 and MTV 1250 offering 8,000 rpm/700 ft lbs. of torque and 4,500 rpm/1,200 ft lbs. plus 200 bar/3,000 psi high pressure coolant for integrated turning, are joining the STC-MTV family of horizontal machining centers.

The capability to keep eighty tools resident with high horsepower motors means heavy metal removal and flexibility. B-axis surfacing with up to 135 travel handles up to ½" diameter tooling. Software technologies increase effectiveness including Star CNC's HFT (High Frequency Turning) software handle chip control in tough materials, Star CNC Motion Control System optimizes your program to reduce cycle time, and the Star Monitoring and Operator Support System (SMOOSS-i) allows remote monitoring with real-time efficiency reporting and operator intervention predictability.