Products

The improved frame rate of the ImageIR 5300 ensures that users can use this model to solve a wide range of tasks in industry and science. Their modular design consisting of an optics, detector and interface module makes it easy to adapt to a wide variety of measurement scenarios. The integrated process and trigger interface enables the infrared camera to be synchronized precisely with external processes for analyses – and in the case of the ImageIR® 5300, these processes can readily be connected at maximum speeds.

The exceptionally smooth yet hard coating improves surface quality, which, in turn, significantly reduces torque requirements. Intended for blind hole and through hole threads and thread depths up to 3.5 x DN in steel, it has also shown good results in machining cast iron and aluminum. The TC470 Supreme is offered in four variants: With or without lubrication grooves and/or internal coolant, as well as with radial or axial coolant outlet, optimized for long and short threads.

The LT360 is configurable and compact, consisting of a cutting head mounted on a 6-axis robot, and a working table with a work area of 1500 x 1000 mm. For increased productivity, a 20 kg capacity handling robot and part holding table can be integrated. Available with a 2 kW or 3 kW fiber laser source, the cutting head features capacitive height sensing, allowing maximum freedom for cutting any three-dimensional profile in space to truly cut at 360° with an accuracy of ±0.15 mm (.006") and a repeatability of ±0.05 mm (.002").

Using the combination of ESPRIT probing and CNC machines outfitted with touch probes, shops will enjoy increased throughput on existing equipment while reducing operator intervention. This benefit comes along with increases in part consistency and quality.

Ideal for CNC machining applications, the SJL provides the highest accuracy for thin-walled and deformation-sensitive workpieces. Unique to the SJL is the ability to be switched from a 2+2+2 lever equalizing chuck to classic 6-jaw self-centering chuck depending on application requirements.

CAD analysis benefits from a new function which improves the suite of analysis-shading modes. Draft Analysis has been added to the existing Undercut and Accessibility shading, performing an on-the-fly analysis of the draft angle. This uses the same technique as in the undercut mode, but extended to more ranges. The colors and angular value of each range can be changed by simply clicking on the colors or numeric labels on the graphics toolbar.

The lathe's small size and footprint make it an excellent option for machine shops needing a second-op machine or additional chuck. Every bed lathe is manufactured and tested to ensure it meets the highest quality and accuracy standards.

The FPL is a very low profile (20mm high) flat pack mounting for size constrained applications. The base is 30mm square, and the laser housing is 18mm x 18mm. With the extended laser unit, the overall length is 45mm. The FPL laser diode module has been fitted with two different mounting options: The 1- ¼-20 threaded mounting hole in the center of the base, or two M4 / 9/16" holes for through base mounting.

Because cleanliness is essential for accurate measuring, the cleaning module runs tools through an ultrasonic bath. After the bath, an airstream – adjusted according to tool length – then dries the tools. After the tools are cleaned and measured, the laser- marking module imparts static or dynamic data on to tool shanks or end faces.

With the new SonoPower 3S megasound system with frequencies of 500 and 1,000 kHz, Weber Ultrasonics has developed an efficient solution for cleaning sensitive components. It ensures especially gentle and yet effective handling of the components with high levels of cleanliness. The system consists of the intelligent SonoPower 3S Megasonic Boost and the matching SonoPlate HF high-frequency transducers.

The Raspberry Pi's low-cost and widely used hardware can contain valuable and protectable data and functions. Swissbit now offers an easy-to-implement safety system based on a long-lasting flash memory suitable for industrial applications. This way, hardware-based security functions can be implemented independently of the CPU and with high flexibility – even retrospectively. The PS-45u-DP-microSD card 'Raspberry Edition' encrypts the data and allows access only via a flexible configurable authentication function, which unlocks further access to the data carrier in the pre-boot phase. The number of permitted invalid access attempts can be configured.n