Products

This AH9130 grade expansion encompasses the DMP line of general-purpose drilling, succeeding the popular DMC drill head for precision drilling. Developed for drilling applications, AH9130 is a nano-multilayer PVD coating consisting of three distinctive layers.

DrillMeister offers the TIDCF chamfering holder that can be attached to the TID drill shank allowing chamfering and drilling in a single pass for reduced machining times. The chamfering inserts are available for 30°, 45°, and 60° chamfers.

Precision positioning of the sample is a must for accurate results when using an inverted microscope. PI provides options with high stability motorized stages for long travel ranges with wide dynamic range, manual sample positioning / prepositioning, piezo scanning stages, and z-positioning / vertical stages to move the sample or the objective.

Benefits for users include highly rigid and dynamic piezoelectric measurement technology, digital data that is resistant to interference from disturbance variables, and end-to-end communication all the way through to sensor level. IO-Link technology supplies users with real-time data to monitor the condition of their plants and measurement chains.

The EMUGE A-H family of taps is the best solution for tapping extremely abrasive materials and those materials with elevated hardness levels, such as cast iron, common in the heavy equipment and agricultural vehicle markets. EMUGE A-H Taps are now available with or without coolant through holes and with TiCN coating, or NT nitride surface treatment, for improved tool life.

For exceptionally quick and accurate turning of a variety of parts, turret index times are as low as .19 seconds, robot cycle times 17.9 seconds and loading times 4.8 seconds. An optimized bed design, with a grooving width of 14mm, renders this lathe exceptionally rigid.

The austenitic AISI 316L (A4) stainless steel receives its high resistance to chlorides and acids primarily from the chromium, nickel, and molybdenum constituents. This predestines the AISI 316L (A4) standard parts from Winco for use on ships and other offshore sites, in swimming pools with chlorinated or mineral-rich waters and, anywhere else that requires such thorough cleaning.

The EconoMaster drilling unit features low power and air consumption, adjustable motor housing, adjustable total stroke up to 4", hydraulic feed control cylinder, J33 taper spindle end, 0-1/2" drill chuck, electric front & rear position limit switches, belt tensioner and chrome-plated quill.

The GD8 geometry has been specifically developed for grooving along the shoulders and grooving of large diameters without interference of the insert with the finished workpiece. The VG8 geometry has been developed for finishing operations behind a collar.

The new system also ensures constant measurement accuracy with the shortest possible measuring times. Once the measurements are taken, feedback is directed right back to the machine's CNC control unit, allowing tool corrections to be made automatically and immediately during the machining process.

A perfectly timed sequence becomes apparent for truck differentials, it consists of three individual parts before production starts: two housing parts and the ring gear. These each weigh up to 130 kilos (287 lbs) and have a diameter of up to 600 millimeters (24 in).

Entirely new features and updated technologies from the previous version, which can be used to further optimize machine vision processes. The bar code reader has been improved by an advanced decoding algorithm, which increases the decoding rate when reading codes with very thin bars.