Products

Products • April 15, 2020

EconoMaster Line of Drilling Units

The EconoMaster drilling unit features low power and air consumption, adjustable motor housing, adjustable total stroke up to 4", hydraulic feed control cylinder, J33 taper spindle end, 0-1/2" drill chuck, electric front & rear position limit switches, belt tensioner and chrome-plated quill. Basic unit weight is 45 lbs. n

Products • April 14, 2020

G3051-P Grooving System

The GD8 geometry has been specifically developed for grooving along the shoulders and grooving of large diameters without interference of the insert with the finished workpiece. The VG8 geometry has been developed for finishing operations behind a collar.

Products • April 14, 2020

Thread Inspection System (TIS)

The new system also ensures constant measurement accuracy with the shortest possible measuring times. Once the measurements are taken, feedback is directed right back to the machine's CNC control unit, allowing tool corrections to be made automatically and immediately during the machining process.

Products • April 14, 2020

EMAG Production System

A perfectly timed sequence becomes apparent for truck differentials, it consists of three individual parts before production starts: two housing parts and the ring gear. These each weigh up to 130 kilos (287 lbs) and have a diameter of up to 600 millimeters (24 in).

Products • April 13, 2020

HALCON 20.05 Software

Entirely new features and updated technologies from the previous version, which can be used to further optimize machine vision processes. The bar code reader has been improved by an advanced decoding algorithm, which increases the decoding rate when reading codes with very thin bars.

Products • April 13, 2020

Generation D Series Vertical Machining Centers

In the USA, Romi offers three models, the D 800, the D 1000, and the D 1250. All three are equipped with big-bore 40-taper direct drive spindles with speeds of 10,000 or 15,000 rpm. Direct drive is low maintenance and improves accuracy and repeatability, while the big-bore 40-taper increases stiffness and allows increased depth of cut during machining.n

Products • April 13, 2020

Chainflex CFBUS.045 and CFBUS.049 Ethernet Cables

Industrial Ethernet is the future step for the digitized factory of tomorrow. Many studies show that the world of fieldbus is stagnating, and the number of Ethernet nodes is increasing, with high double-digit growth rates. This is true in Asia but increasingly in Europe as well, and users are choosing CC-Link IE (Industrial Ethernet) technologies. These systems offer seamless data exchange on all levels of a production facility, from the highest control level to the manufacturing levels.

Products • April 13, 2020

ActiNav Autonomous Bin Picking Kit

ActiNav combines real-time autonomous motion control, collaborative robotics, vision and sensor systems in one easy to use, fast to deploy and cost-effective kit. The system requires no vision or robotic programming expertise, but is instead based on a "teach-by-demonstration" principle.

Products • April 10, 2020

nanoScan3

Based on successful microScan3 technology, the 2D safety sensor, nanoScan3, uses patented safeHDDM® scan technology. This enables the nanoScan3 to hold up well even in harsh or challenging ambient conditions. It is impervious to interferences like dust, contamination, and ambient light.n

Products • April 10, 2020

Integrated Embedded Air Bearings

There is now a portable rigging kit designed to create stunning visual effects and suitable for moving sets, props, seats wagons, scaffolds, machinery, equipment and components up to 34,000 lbs. The compact kit accommodates heavy, awkward, and fragile loads up to 40' long.

Products • April 9, 2020

S wide

The S wide is a dedicated solution designed to rapidly measure large sample areas up to 300 x 300 mm (11.8 x 11.8 in). It provides all the benefits of a digital microscope integrated into a high-resolution measuring instrument. Extremely easy-to-use with one button data acquisition.n

Products • April 9, 2020

D3 and D1 Dryve Motor Control Systems

The D3 dryve controls simple linear or rotations axes with DC motors without any software or a PC. For more complex travels, such as with multi-axis robots or delta robots, igus offers the D1 drive, which is a control system for stepper motors, DC motors of EC/BLDC motors. The motor control system can be modified live or simply operated via a web browser.