Products

Products • February 27, 2019

Range of Knobs

WDS Component Parts Ltd. has expanded its range of detent pins by developing a range of knobs that aid handling, particularly in adverse conditions. Detent pins are one of the quickest and easiest ways to position and secure parts and basically consist of a shaft with a spring-loaded ball bearing at the leading end, which acts to hold the pin in position once it is in use. A sharp tug on the pin will release it when required.

Products • February 27, 2019

LASORTING for Cutting, Sorting and Storage of Sheet Metal

Recently acquired by Mitsubishi Electric Corp., ASTES4, a company based in Switzerland, specializes in the development of automated sorting solutions for sheet metal laser processing machines. ASTES4 has developed LASORTING – the first fully integrated system for the cutting, sorting and storage of sheet metal to streamline processes, speed up production and reduce labor costs.

Products • February 27, 2019

Verti-Lift Hydraulic Upenders

Verti-Lift upenders with V-cradle design are ideal for ergonomic positioning rolls of steel, paper rolls, coils or spools, tubular tanks, and other cylindrical products. With a 6,000-lb. capacity, these ergonomic positioning devices have enough power to re-position heavy loads, while the V-cradle keeps the load intact during movement.

Products • February 26, 2019

RP GOLD Water-Based Rust Preventive

Madison Chemical introduces RP GOLD, a versatile water-based rust preventive that provides long-term indoor storage protection for ferrous and copper alloys. Applied to previously cleaned parts by immersion, manual spray or recirculated spray methods, RP GOLD leaves a nearly invisible, dry-to-the-touch film that provides up to four weeks of protection (or longer when used at higher concentrations).

Products • February 26, 2019

GN 648.1/GN 648.2 and GN 648.5/GN 648.6 Rod End Bearings

JW Winco Inc. offers an expanded range of rod end bearings, including GN 648.1/GN 648.2 steel zinc-plated, tapped type or with threaded stem and GN 648.5/GN 648.6 stainless steel, tapped type or with threaded stem.n n

Products • February 26, 2019

APODIUS Vision System 2D

Hexagon's Manufacturing Intelligence division launched the APODIUS Vision System 2D, a standalone solution for advanced carbon-fiber part inspection. Designed for fast results within both production-integrated inspection or offline quality assurance contexts, the APODIUS Vision System 2D delivers 2D fiber orientation analysis. The system's data output options allow for specific actual-to-target value comparison – a key tool for ensuring high-quality results during composite production.

Products • February 26, 2019

POLIVLIES Ceramic Oxide CO-COOL Flap Disc

PFERD has introduced the POLIVLIES ceramic oxide CO-COOL flap disc, the newest addition to its popular line of POLIVLIES nonwoven products. Premium CO-COOL abrasive material provides consistently high grinding performance, with special top-sizing for reduced loading and cooler grinding on poor heat-conducting materials.

Products • February 25, 2019

GARANT GridLine Workshop Cabinets

Hoffmann Group USA announced the availability of its new GARANT GridLine Workshop cabinets. GARANT's GridLine series focuses on three key areas of usability; ergonomics, efficiency and design. The cabinets were developed using a planned, common grid technique, which creates a multitude of possibilities for combining and extending the system. Aesthetics and functionality are guaranteed, even if changes are made to the workshop equipment in the future.

Products • February 25, 2019

D-ROC GPD482 AeroDex Work Glove

Magid introduces AeroDex – a first-to-market, lightweight shell technology. AeroDex delivers extremely lightweight 360° A4 cut resistance that is over 50 percent lighter than a comparable Cut A4.

Products • February 25, 2019

Multi-Rail (MR), Knife Grip and Hydraulic Kits

Jergens Inc. announces three key additions to the company's range of OK Vise compact, low-profile edge clamps. Among them are Multi-Rail (MR), Knife Grip and hydraulic kits.

Products • February 25, 2019

TriTek Palm Glove Coating

Magid introduces the TriTek Palm – a flexible, dual-layer glove coating that provides oil grip without saturation.

Products • February 21, 2019

Software for CNC Simulation, Verification and Polygon-Mesh Modeling

MecSoft Corp. has licensed MachineWorks' cloud-computing technology. MachineWorks Ltd. is a provider of component software for CNC simulation, verification and polygon-mesh modeling. The new cloud-based technology provides CNC manufacturers with a solution for running simulation on a server whilst displaying the results on one or more remote clients.