Products

Kennametal's latest weapon in the war on chatter is one that will have machinists everywhere saying, "I need that." The new boring system boasts the most effective antichatter mechanism ever developed by Kennametal, and also offers an extensive range of indexable heads and shank sizes.

SICK announces the launch of the deTec4 safety light curtain. The deTec4 is a new generation of safety light curtains. With protective heights of 300 millimeters to 2,100 millimeters and an IP65, IP67 and IP69K enclosure rating, the deTec4 is proven for use in harsh environments.

Cortec Corp. has developed a simple water treatment for use in cooling systems where low conductivity or low sodium products are required. Based solely on organic components, VpCI-648 does not contain nitrites or any halogen counter ions. At recommended dosages, VpCI-648 does not significantly contribute to the conductivity of water systems. VpCI-648 protects both ferrous metals and copper.

Hypertherm announced a minor version update of Rotary Tube Pro, software that makes it easier to design and cut tube and pipe parts with no 3D CAD experience required.

HEIDENHAIN introduces a new sealed angle encoder that can be used as an alternative to modular angular encoders for use in motion control machining applications that require a larger than usual through-hole. Called the RCN 6000 series, these new absolute sealed angle encoders with integral bearings have an exceptionally large hollow shaft diameter of 180mm (7.09 inches), allowing larger scale machines to take advantage of high resolution and signal quality that's expected from HEIDENHAIN angle encoders.

Vortec has updated their online heat load calculator, allowing users to determine cooling requirements for their specific enclosure. The new tool, available at https://www.vortec.com/heatload/calculator allows users to input enclosure dimensions, compressed air inlet temperature and pressure, current cabinet temperatures, worst case ambient temperature and whether the enclosure is in direct contact with sunlight (and enclosure color).

Updated 3D machining functions top the bill for engineering companies in the latest release of Alphacam. Users of Alphacam 2019 R1 will find two major enhancements for 3D Machining – firstly, what Brand Manager Hector Henry says is a much-improved Automatic Collision Detection algorithm, which avoids gouging non-machined faces and surfaces in the Select Solid Faces function.

MarkinBOX has released a new battery-operated, cordless part marker called Patmark. With a lithium-ion battery and charger, plus a software app that connects to your device via Wi-Fi, you can get a clean and clear mark without a cord.

The Kennametal APX series of ROCTEC nozzles provide 20 percent greater life than the industry-leading ROCTEC 500 waterjet series, which already significantly outperforms other conventional tungsten carbide nozzles. The APX nozzles are suitable for use in precision cutting applications where long, uninterrupted cuts or close tolerances must be maintained for long periods to maintain part integrity or minimize expensive scrap due to premature nozzle failure.

EXOR has taken the harsh environment eTOP500 series and updated it with the recently released eX700 series. This natural progression allows you to combine a high-performance sunlight readable display with state-of-the-art connectivity, such as OPC UA.

Radiac Abrasives Inc. announces a new superabrasive stocking program, including a Tool Room superabrasive assortment and VNX2 wheels, which are in stock and available to ship within 48 hours.

The new EDGE2 DSS system from DAPRA Corp. was engineered to deliver both premium 90° milling performance and indexable milling value. Double-sided DSS inserts provide four usable cutting edges to significantly lower cost-per-edge versus single-sided inserts, and DAPRA's permanent automatic cutter replacement program makes it easier for shops to keep good-condition tools in use rather than making do with worn-out cutters.