Products

ISCAR is introducing 17 mm diameter PENTA inserts, designed for machining small size parts with up to 4 mm maximum grooving depth capability. The inserts are available in a range of widths from 0.25 to 3.18 mm, with different edge configurations for parting, grooving, turning and threading.

A new family of tools and economical 5 pocket adapters for existing TANG-GRIP inserts in sizes of 2 and 3mm. These new adapters will allow parting applications of bar diameters up to Ø45mm. A new SLIM-GRIP 1.2-1.6mm inserts for a pentagonal adapter suitable for parting up to 22mm bar diameter.

The larger diameter cutter and new lengths both boost the Fullcut Mill FCM BBT line's already-considerable versatility, allowing machinists to tailor their tool selections for many different applications. The BIG-PLUS BBT shank products are compatible with both BIG-PLUS and existing BT spindle machines. This allows for seamless integration, no matter the machining setup.

PLASMA CUT is the perfect solution to keeping your table productive for long runs and less frequent clean outs.

The SAEJ1926-X will cut the required spot face and O-Ring taper only; it does not cut the thread minor diameter. A coolant hole to each flute aids with increased chip evacuation, higher speeds and feeds, and longer tool life. The polished flute face optimizes performance for a smoother surface finish.

The AS5202-X will cut the required spot face and counterbore only; it does not cut the thread minor diameter. A coolant hole to each flute aids with increased chip evacuation, higher speeds and feeds, and longer tool life. The polished flute face optimizes performance for a smoother surface finish.

The QUICK® product spectrum offers innovative solutions for diverse knurling technology applications. For both form knurling and cut knurling, QUICK® fulfills the most stringent quality standards and masters difficult tasks. Knurling tools are available for use on a wide range of workpiece diameters, including small tools for Swiss type lathes from Ø 1.5 mm.

Rineck offers standard and custom shrink fit tool holders with various connections including CAT, HSK, BT, SK, PSC and straight shank extensions. In addition, ER shrink fit collets are available. For added rigidity, flange or dual contact holders are available for CAT and BT tapers.

A titanium nitride (TiN) bearing nut improves rigidity as the uniquely designed gold ring reduces collet damage, reduces micro vibration with the collet flange, and eliminates friction with the collet. It improves the cutting rigidity and the quality of the cut compared to traditional collet chucks.

A concentration of 0.5% VpCI-649 BD may be all that is needed to inhibit corrosion inside the tooling cooling water system. As time passes, this concentration may change as water is lost. Workers should therefore periodically monitor the water (e.g., by the molybdate tracer or refractometer) to make sure the right level of VpCI®-649 BD remains.

Full grip jaws are manufactured for chuck sizes ranges between 4" and 10" diameters and are available in 1018 steel and 6061 aluminum. Jaw heights are available between 1" and 4". Soft jaws are available in 1018 steel and 6061 aluminum, in heights from .75" to 5.00 inches, and widths from .75 to 3.00 inches.

The RenAM 500 Ultra metal AM system is the latest model in the RenAM 500 family, which also includes the Flex system, optimized for R&D work, and the flagship closed-loop powder recirculation model for series production. The entire RenAM 500 family is available with one (500S) or four (500Q) high powered lasers, each able to access the whole powder bed simultaneously.