Products

Products • June 25, 2018

MILLHOG Rolling Motor and Tube Expander Kits

A line of tube expander kits that feature rolling motors with adjustable torque to create a uniform and tight mechanical seal for repairing boilers has been introduced for sale or rent from Esco Tool. Esco MILLHOG Rolling Motor and Tube Expander Kits feature a rolling motor with adjustable torque control to prevent over and under expansion; assuring a tight and uniform bond between the tube and OD and the tube sheet.

Products • June 25, 2018

DeHoff G548-D4 4-Spindle Gundrilling Machine

The DeHoff G548-D4 is a 4-spindle gundrilling machine designed for high-volume production of gun barrels. It features automated loading and unloading of the barrels to enable long periods of untended machine running. Up to 48 barrels can be preloaded into the magazine holder, and lift-and-carry automation is used to load the barrels in and out of the fixturing.

Products • June 25, 2018

Klübersynth GE 4 80 W 140 Fully Synthetic Gear Oil

Klüber Lubrication offers Klübersynth GE 4 80 W 140, a fully synthetic high-performance gear oil based on polyalphaolefin (PAO) chemistry that offers high stability and protection even under shock loads.

Products • June 25, 2018

Mikron MILL S 400/500 GRAPHITE and Mikron HSM 500 GRAPHITE

The information and communications technology (ICT) and automotive sectors requiring graphite molds for glass end products and graphite electrodes present distinct challenges in terms of surface finish, precision, process reliability and productivity. GF Machining Solutions' high-speed Mikron MILL S 400/500 GRAPHITE and Mikron HSM 500 GRAPHITE are dedicated specifically to graphite machining, helping users master precision over time and meet their customers' expectations for flawless surface quality.

Products • June 25, 2018

Emergency Shower/Decontamination Booths

When Time is of the Essence, after an exposure to a hazardous chemical substance, any delay, even for a few seconds, can result in serious injury. OSHA and ANSI require that emergency showers be located within 10 seconds walking distance from hazardous site location. HEMCO emergency shower/decontamination booths are fully assembled and ready for installation to water supply and waste systems.

Products • June 25, 2018

#9683312 Zip-Miter Horizontal Bandsaw

The innovative design of the 9-inch Zip-Miter horizontal bandsaw makes it ideal for cutting straight or miter cuts on ferrous and nonferrous metals. Its built from the blade out constrution, means the bandsaw provides the same cutting accuracy as a cold saw.

Products • June 25, 2018

TruVu 360 Enterprise Fluid Intelligence Platform

Spectro Scientific has introduced TruVu 360 Enterprise Fluid Intelligence Platform, an all-encompassing web-based fluid analysis data management system. The new platform simplifies and streamlines the fluid analysis process so high-quality information and actionable intelligence facilitate rapid decision-making. It closes the gap between maintenance recommendations on the oil analysis report and the impact on continuous process improvement.

Products • June 25, 2018

iXworld Online Portal

INDEX Corp. has announced iXworld, a new online portal that expands the company's service offerings and establishes a single interface for a broad spectrum of information and functionality. At launch, iXworld will include four distinct areas: iX4.0, iXplore, iXshop and iXservices. This suite of services will provide customers with fast, secure connectivity, production data, remote diagnostics, spare parts ordering from the machine and more, all designed to minimize downtime and further boost machine utilization rates.

Products • June 25, 2018

Integrated Granite Motion Systems

Machine components such as bearings, encoders, and drive mechanisms are engineered and assembled directly on the granite base and bridge structures in an Integrated Granite Motion (IGM) system. Therefore, IGM systems are distinct from traditional stage-on-granite systems where discrete positioning stages and components are used in the system design. Aerotech IGM systems are custom-engineered to fit the unique and specific needs of your application or process.

Products • June 25, 2018

PGN-Plus-P Gripper

SCHUNK has introduced several improvements on the original PGN-Plus and has announced the newest generation gripper, PGN-Plus-P. Enlarged supporting dimensions between the six load-bearing shoulders of the multiple-tooth guidance allow higher moment capacity, which can accommodated longer fingers and greater loads.

Products • June 25, 2018

Mastercam 2019 CAD/CAM Software

CNC Software Inc. announces the release of Mastercam 2019. It is available for purchase. Mastercam 2019 was developed to streamline the manufacturing process from job setup to job completion. Mastercam 2019 increases machining productivity and reduces overall production costs with new 2D through multiaxis milling automation features, CAD and model preparation improvements, expanded 3D tooling, Accelerated Finishing and powerful turning and Mill-Turn enhancements.

Products • June 21, 2018

AP5 Series of Cutting Tools for the POW•R•PATH line

IMCO Carbide Tool adds the new AP5 Series of cutting tools to its POW•R•PATH line, revolutionizing the benefits of high-efficiency machining methods to work in aluminum alloys. A unique cutting edge design on all five flutes combines with generous chip evacuation space and an extra durable coating to generate high metal-removal rates.