Products

Products • December 20, 2017

DockLock Airline Zero-Point Clamping System

Kurt's new pneumatic zero-point clamping system runs on existing shop air readily available in every machine shop. The Kurt DockLock Airline system is a high precision system, which can reduce setup time over 90 percent by rapid change-out of large and small machine fixtures.

Products • December 19, 2017

WorkPLAN 2018 R1 Enterprise Resource Planning Software

The latest version of WorkPLAN ERP, from Vero Software, has been developed for the specific requirements of production management, in terms of mobility and rapidity from the design phase of a project, right through to delivery of the end product.

Products • December 19, 2017

LaserNet 200 Comprehensive Particle Analyzer Series

The new Version 7 of the LaserNet 200 comprehensive particle analyzer series from Spectro Scientific provides extensive analysis of particles in lubricating and hydraulic fluids. Compared to earlier releases, the new series increases particle counting range up to 10 million particles/ml without dilution, and includes a new set of ferrous particle measurements that gives users new insights into the progress of machine wear.

Products • December 19, 2017

CB6 Walk/Ride Transport Base

Move a sump cleaner safely through plant between collection, treatment or disposal with CB6 walk/ride transport base from CECOR. Sump cleaner is mounted on a battery-powered pallet truck with stand-on platform for easy driving.

Products • December 18, 2017

No. 1002 Electrically Heated Cabinet Oven

No. 1002 is an electrically heated, 500º F (~260º C) cabinet oven from Grieve, currently used for various test procedures in the customer's laboratory. Work space dimensions measure 20"W x 20"D x 20"H. 8KW are installed in Incoloy sheathed tubular elements to heat the unit, while a 400-cfm, 1/3-hp recirculating blower provides horizontal airflow across the load.

Products • December 15, 2017

Safety Integrated plus Software

Siemens offers a new version of its Safety Integrated (SI) function for Sinumerik 840D sI in the form of its Safety Integrated plus — software for integrated control solutions. Previously, completely separate programs had to be written for the NC Kernel (NCK) and PLC. Now, this will only be necessary for the PLC.

Products • December 15, 2017

Sinumerik Operate

The Sinumerik Operate user interface has been further developed to enable even more easily manageable and intuitive operation of machine tools. This gives machine tool builders the opportunity to develop their own individual design in keeping with their corporate identity, lending machine tools a contemporary, distinctive look.

Products • December 15, 2017

KL-200 Double-Cut Shears

The KL-200 double-cut shears from Kett Tool cut cold-rolled steel, stainless steel, plastic and Formica without warping or bending the finished piece. The result is less wasted material, and a savings of time and money for manufacturers and contractors.

Products • December 14, 2017

1/2 NPT Internal Mix, 360 degree, Circular Pattern Atomizing Spray Nozzle

EXAIR's 1/2 NPT internal mix 360 degree hollow circular pattern atomizing spray nozzle atomizes fluid and sprays away from the nozzle in all directions, up to 13 feet in diameter. These nozzles are ideal where a liquid application is needed in a broad area, such as dust suppression, humidification and cooling.

Products • December 14, 2017

EL922x EtherCAT Terminal Series

Beckhoff announced the new EL922x EtherCAT Terminal series, which directly integrates electronic overcurrent protection to safeguard 24 V DC system components in the EtherCAT I/O system. In comparison with currently available protection devices, costs and space requirements in control cabinets can be reduced without having to use conventional, inflexible stand-alone systems.

Products • December 14, 2017

WorkNC 2018 R1 Software

The newly-released version of WorkNC from Vero Software introduces two important new tools to the portfolio: a direct modelling CAD system and a Robot Module, making offline programming of robots easy, even for inexperienced users. Described as "the right CAD for CAM," WorkNC Designer is a powerful new application focusing on the specific needs of machinist programmers, enabling users to create designs or modify existing geometry from third-party CAD systems.

Products • December 14, 2017

INOX Handpieces for BW Machines

Nowadays, more and more products are being manufactured from stainless steel and higher and higher requirements are being placed on the surface finish of these products. In the process, a problem has appeared that does not seem to be spectacular at first glance, but ultimately causes high costs: extraneous rust.