Products

CHIRON introduces its new vertical twin-spindle 5-axis machining center, DZ08 FX Precision. The machine includes contact-free linear direct drives in the X. Y and Z axes. These drives bring the spindles faster to optimum feed rates and permit increased traverse rates.

Madison Chemical introduces Compound RP-99S, a versatile water-based rust preventive for use on ferrous and copper metals. Applied to previously cleaned parts by immersion, manual spray or recirculated spray methods, Compound RP-99S leaves a nearly invisible, dry-to-the touch film that provides short-term indoor storage protection for treated parts lasting up to four weeks, or longer depending on concentration.

LMC Workholding offers the Energy series large-bore air chucks, featuring a built-in air cylinder and extra-large through-hole. The full spindle bore of the lathe can be utilized for through-hole work and long jaw travels provides more clearance for through feeding pipe.

Guyson's new multiple-axis CNC grit blaster was designed for a prep prior to coat application in the aerospace industry. The heart of this system is based around the blast manipulation with 4-axis controls directed by a Siemens CNC system and roof-mounted 2-axis cartesian gantry with table positional capability of 0° to 360°.

Radix Inc. announces the release of its advanced vision inspection technology, InspectTracker. Support for Industry 4.0 with digitization of data for manufacturers was the impetus behind the development of InspectTracker. In particular, the requirements for detailed inspection procedures for complex part surfaces, currently hand inspected in fluorescent penetrant inspection booths, or FPI booths, was an opportunity for digitization that InspectTracker addresses.

Some good ideas can be made even better. Much better. This was certainly the case when Kennametal engineers took the strength and versatility of their proven KSEM modular drill system and combined it with the ease of use and low feed forces of its smaller companion drill, KenTIP, the company reports.

Using Finite Element Analysis (FEA), Kurt designed and optimized the new XL6 XtraLong vise to be better performing than its predecessor vise the 640XL. Boasting a 14.50" opening, the XL6 manual vise clamping capacity is .50" more than the 640XL vise and accomplishes the increase even while the over length was reduced by .42" to 24.10".

In recent years the gear market has been experiencing a trend towards outsourcing. As a result of this shift, many suppliers are receiving orders for the soft machining—wet or dry hobbing--of gears. "With the LC 280 α, Liebherr has developed a new generation of gear hobbing machines for such short-term requests", said Dr.-Ing.

Gentle and quick transportation of goods plays an important role in material handling and the packaging industry. Above all, the speeds of the plants are constantly increasing due to increased productivity. For this reason, igus has developed knife edge rollers made from the high-performance plastic iglide H1, created specifically for applications with higher transport speeds.

Demand for operational efficiencies such as greater visualization into a factory's automation solutions portfolio has prompted Mitsubishi Electric Automation Inc. to introduce its latest human machine interface (HMI). The GT25 Wide HMI is an interface that monitors and controls machine components with a graphical touchscreen that connects to equipment such as PLCs, VFDs and servos.

The Jenoptik Industrial Metrology division offers a fully automated measuring station, which can be operated directly by staff on the production line. The HOMMEL-ETAMIC wavemove combines high-precision roughness and contour measurement technology with innovative CNC technology and eight fully automatic CNC axes to measure both roughness and contours in a single measuring run, recording as many data points as necessary.

HEIDENHAIN's LIC 4100 V linear encoder for vacuum environments is a new addition to the LIC 4100 linear absolute kit style encoder system. With several technical considerations, these new encoders can operate down to 6*10-7 mbar, survive a 100o C bake out and have low outgassing.