Products

Products • June 27, 2023

Adjustable Damped Boring Bar

The exact adjustment of the damper, made of a carbide rod supported in O-rings, is made from the outside via an adjustment screw. Adjustment is achieved by fine-tuning the pre-tension of the O-rings. This allows the boring bar to be precisely set according to the vibration occurring in each application. As standard, Horn offers the tools from stock in the length/diameter ratios 5 x diameter and 8 x diameter.

Products • June 27, 2023

Polished Rake Faces

Especially for milling aluminium alloys and plastics, Horn offers the indexable inserts with polished rake faces on all four edges from stock to counteract the formation of built-up edges. In conjunction with the positive chip breaker geometry, the sharp ground cutting edge produces a soft cut and high surface quality. The special grade is designed for use with the ISO N material group. The inserts can be used in all cutter body variants.

Products • June 27, 2023

6061 Aluminium Shaft Collars

The aluminium collars are much easier to machine compared to steel. This more readily enables customization, a requirement if the collar needs to fit specific shaft designs or dimensions, either for retrofit or new machine builds. Along with this capability, aluminium shares a similar anti-corrosion performance to stainless steel, ensuring increased durability.

Products • June 27, 2023

TechniDrill 2.00-30-48

The TechniDrill 2.00-30-48 has a gundrilling diameter capacity of 2 inches (50.8 mm) and a maximum gundrilling depth of 48 inches (1219 mm). It features a 30 horsepower AC spindle motor and two-speed gearbox to provide versatile gundrilling performance. The workpiece is counter-rotated via pneumatically operated 3-jaw chucks to increase the accuracy of the gundrilled hole.

Products • June 27, 2023

Radial Pole Magnetic Chuck

Since users are holding the part for the base, setups are dramatically reduced. Pole extensions allow users to raise the piece from the magnet surface making the top, inner and outer diameters fully machinable. This process dramatically reduces part distortion due to clamping with ZERO distortion and allowing for far more accurate part processing.

Products • June 16, 2023

Posidyne Clutch/Brakes

Designed with low inertia cycling components makes the Posidyne clutch brake more efficient, requiring less motor horsepower to accelerate the load, and less torque to stop the load. Their totally enclosed design is impervious to dust, chips, chemicals, coolants, caustic wash down, weather, and more, making them ideal for hostile environments. They are field proven in diverse applications such as lumber mills, shingle plants, fiberglass insulation production, food processing, packaging, metalworking, and more.

Products • June 16, 2023

Mantis 3rd Gen

Mantis 3rd Gen features include; improved optics for both hand-to-eye coordination and excellent depth perception, a 3-position turret to house up to 3 objectives ranging from 3x to 15x, the introduction of an 8x super long working distance lens, five different illumination options providing flexibility to optimize the lighting to view the perfect image, and the Mantis PIXO offers an improved, higher resolution camera for image and video capture. The system also features an option to switch between white light and UV light using a toggle switch.

Products • June 16, 2023

CorePlus

The CorePlus gas connect console is positioned between the current Core and VWI (Vented Water Injection) consoles and introduces argon gas capability for customers that primarily cut mild steel. The gas console offers all Core console capabilities plus argon marking and an increase in piercing thickness with argon-assist enhanced piercing capability.n

Products • June 16, 2023

Vertical Tilt-Frame Band Saws

Cosen Saws V-1822 is an exceptional entry-level cutting solution that is simple and reliable. Ideal for workshops and small-scale operations, this saw is easy to use and allows operators to control the entire cutting process manually. Cosen Saws V-2026NC & V-2230NC represent a significant step up in terms of efficiency and productivity. These versatile band saws replace manual operation with easy-to-use semi-automatic features, making it an excellent choice for medium-scale industrial applications.

Products • June 16, 2023

ALTO 6.5.5

Designed for touch-trigger probing only, the CMM is capable of capturing precise measurements very rapidly, as it is able to deploy a motorised PH20 5-axis probe head from Renishaw for a three-fold increase in inspection speed. Continuous angular rotation and infinite positioning (similar to the company's top of the range REVO2 probing system) avoids having to move the machine's X, Y, and Z axes at high speed, minimising dynamic errors. For some measurements in a cycle, it is not necessary to move the linear axes at all. The results are better accuracy and repeatability.

Products • June 16, 2023

SPECTROLAB S LAS02

Continuously improved by customer input and rigorous usability testing, the new SPECTROLAB S LAS02 features proprietary CMOS+T technology to identify and measure, with high accuracy and precision, all elements in incoming, in-production, and out-going materials as well as in researching new materials. The new analyzer is ideal for primary and secondary metal producers, automotive and aerospace manufacturers, and makers of finished and semi-finished goods.

Products • June 16, 2023

WL17 Indexable Insert

The inserts feature three cutting edges at a 50° copying angle. Compared to the WL25 indexable inserts, which measure 25 mm per side, the WL17 inserts measure 17 mm per side. The WL25 inserts are now additionally offered in W0110-C Walter Capto tools and the W1211 QuadFit exchangeable head for Accure.tec anti-vibration boring bars.