Products

The bevel gear box GN 3971 is available in seven sizes with housing lengths between 1.26 and 2.36 in (32 and 60 mm) and widths between 0.71 and 1.38 in (18 and 35 mm). The gear ratio between the gear box shafts is always 1.

DX200 directly binds the diamond particles without using binder materials. This allows the grade to have an extremely pure cutting edge, making it an extremely effective tool for machining application-specific components that demand high levels of material purity, such as metal medical implants and sputtering targets for semiconductor applications.

Cera-Cut End Mills are designed for the consistent cutting of high-temperature resistant materials such as Inconel, Hastelloy, and Nimonic as well as the machining of hardened tool steels. Cera-Cut is also suitable for making interrupted cuts, and offers a tight cutting diameter tolerance ranging from -0.0008" to -0.0016" (-20 to -40 microns), depending on the tool diameter.

Through flexible connectivity via Ethernet and easy programming through the Direct Robot Control (DRC) feature of Mitsubishi Electric´s M8 Series, machine tending can benefit customers that may not have experienced robot programmers available. In addition to DRC, almost any CNC machine can be connected to a shop floor via discrete I/O for non-M8 CNC controls from Mitsubishi Electric and other companies.

The combination finishing machine is really two machines in one because it can handle a multitude of jobs that include contour part finishing, flat stock finishing, polishing, grinding and deburring—virtually any finishing operation. The belt arm adjusts vertically, horizontally and any position in-between.

The global manufacturer has added five variants of square shaped positive inserts for depths of cut up to 6.4 mm to its Pramet brand. The range is suitable for a variety of general engineering and maintenance and repair operations (MRO) machining, with several application-specific geometries and grades available for machining any workpiece material.

The EnDat 3 interface detects its absolute position, rather than just its position relative to a reference. This is a big advantage when a machine starts up, as it does not require any machine movement to establish its position – which can be extremely time-consuming for large machines. EnDat 3, therefore, enables faster startup, which means more throughput.

The DSC 5+, equipped with FlexMode functionality, is the first ever DSC capable of measuring in two different measurement modes. This allows users to run DSC measurements to be carried out in either power compensation mode or heat flux mode, therefore optimizing the measurement conditions for the application needs.

Version 3.50 of edgeConnector Siemens, edgeConnector 804D and edgeConnector Modbus is now compatible with the 64-bit version of ARM (Advanced RISC Machines) processors. This extends the application possibilities to devices like Raspberry Pi, Cisco IR1101, Orange Pi 5 or RevPi Connect.

The FHN Series method compensates for small offsets, including tilt, between the center axis of the tool and the pilot hole. By correcting the offset that occurs when attaching and detaching tools with the holder, it is now possible to achieve higher precision machining.

The 20lb FK-5-1-12 ILP product enables Firetrace to offer its global customers in manufacturing, machining and clean energy, a system that is UL Listed and FM Approved, to protect larger enclosures for CNC machines and electrical cabinets and components.

Across the general machining industry, customers are able to directly plumb in an external coolant line to the back of the sleeve using a standard ½ NPT or ½ BSP pipe fitting. This also gives users the option to adapt external high-pressure pumps directly to a turret station to maximize pressure and flow for long/deep holes.