Products

With a fully automatic maintenance system, Vomat now makes the use of water-miscible MWF even more time- and cost-optimized. The system has a modular design and can be integrated into the respective conditions of each grinding system as required. The heart of the system is the fully automatic mixing and dosing system (MDS) with a tank size of up to 10,000 liters, which constantly regulates the defined ratio of water quantity and coolant concentrate with high precision.

Thanks to significantly reduced friction, this new procedure improves chip removal from the machining zone, while the cutting heat is dissipated even more quickly and effectively through the chips. Temperature increases on the cutting tool and in the workpiece to be machined can be effectively reduced, as can material buildup and galling on the cutting edge. The procedure is suitable for coated and non-coated tools alike.

Offered in a wide range of sizes, the hinges are available in steel as well as stainless steel, and there's also a version with a grease port, enabling regular lubrication. WDS has further expanded its range of continuous hinges, also known as piano hinges. Originally designed for piano lids, these long, continuous hinge designs add stability as well as safety, preventing finger traps in a closing door. Originally stocked in 1.8m lengths for the customer to cut down to size, WDS now provides continuous hinges in various sizes starting from 1m, meaning they're ready to be installed without modification. These hinges are available in stainless steel as well as zinc-coated steel. n

The MA230 Advance solid carbide milling cutting is for universal machining of steel, stainless steel, cast iron and high-temperature superalloys (ISO P, M, K and S workpiece groups) at the highest level. The MA230 Advance cutter is for high-performance roughing and finishing and enables reliable milling with an extremely high metal removal rate. The MA321/MA320 Advance solid carbide milling cutters were also developed for machining ISO P, M, K and S workpieces.

The V-TYPE lever's fixing flanges are engineered to be identical to those of traditional models, ensuring that new housings with the V-TYPE can replace the old version without affecting interchangeability or requiring changes to dimensions, flanges, or mounting positions. The V-TYPE lever is offered in both bulkhead and surface-mounted configurations, with a single lever available for size 44.27 and double levers available for sizes 57.27, 77.27, and 104.27.

Diatool does not limit the times a reamer can be reconditioned, providing an even longer service life of the reamer with no compromise in tool life or cutting quality. Offering standard deliveries of 4-6 weeks and cost savings of 40 percent over new, Diatool's Reamer Reconditioning Service is ideal for machining operations struggling with long lead-times or non-responsive tooling vendors.

SINAMICS G220 is the first drive to join the Siemens Xcelerator portfolio, the Siemens-wide business platform for digital transformation. SINAMICS G220 drives are an integral part of the TIA Portal and feature a digital twin in Startdrive, the drives commissioning tool from Siemens. This allows the behavior of the drive to be tested and optimized before the hardware is available. SINAMICS G220 has an integrated web-server for commissioning which eliminates the need to install software or an app on a PC or mobile device. This saves time and makes drive setup very intuitive and extremely user-friendly.

Easy setup is assured with the electronic type plate on the 1FL2 motor and one-button tunning in the S200 drive. The integrated brake resistor and integrated holding brake control add to the functions in the S200 servo-drive. High durability is designed in with the coated circuit boards (3C2) in the S200 and IP65 motors with metal connection solution. Built-in under-voltage protection is further provided.

SINAMICS S210 offers DC link coupling on 3-phase units for increased power efficiency on multi-axis applications. Corresponding SIMOTICS highly efficient synchronous motors feature high-resolution 22- or 26-bit absolute encoders, single or multi-turn. One-cable connectivity is standard and all motors and feature IP64, IP65, IP67 or IP69X protection. Easier setup and selection are assured with the integrated EMC filter and braking resistor.

The CNCs are integrated in the digital twin of SINUMERIK ONE (Run MyVirtual Machine), so that the appearance and operation correspond to the real control in every respect. In addition, the digital twin has been equipped with new features that simplify engineering and work preparation. Examples of the many innovations include a 3D option that offers support for a second channel, often used for robotic integration.

The cloud-native software analyzes and visualizes dynamic data, processes events, and can be addressed directly from local MES (Manufacturing Execution System) or ERP (Enterprise Resource Planning) systems via API or webhooks. The intelligence acquired based upon position data provides the user with a comprehensive overview of asset tracking, material flow, order information or possible problem areas.

The virtual PLC software can be easily downloaded and integrated directly into an IT environment. This ease-of-use gives operators the possibility of decoupling hardware and software requirements completely. The software will run on computers with Industrial Edge Run Time in the factory while the hardware remains directly on the shopfloor.