Products

Products • July 18, 2016

M2131 Sky-tec Ramping Cutter

The new M2131 Sky·tec Ramping Cutter from Walter reportedly brings new, higher levels of process reliability to the machining of nonferrous metals such as the aluminum wrought alloys or aluminum lithium alloys often used in aircraft structural components. The cutter allows shorter machining time due to its high metal-removal rate and delivers long tool life thanks to the low build-up on the cutting edge.

Products • July 15, 2016

Forkardt SRFN1 Compact Steady Rest

Hardinge announces the introduction of a hydraulically operated steady rest for its Conquest H51 CNC Turning Center. This new attachment is the Forkardt SRFN1 compact steady rest and is the ideal tool to support long workpieces without distorting or deflecting the part.

Products • July 15, 2016

Front Locking Nut Technology for M12 Connectors

Mencom announces new front locking nut technology for its M12 connectors. These front mount receptacles with front lock nut are for thread mount applications that need specific keyway orientations due to the space constraint or any other unexpected engineering situations. Mencom's new front lock nut receptacles allow the keyway to be freely rotated to any orientation required by simply adjusting the connector and the front lock nut.

Products • July 15, 2016

QXD 250

The Vollmer eroding machine QXD 250 makes it possible for tool manufacturers to process more than 30 percent more PCD cutters in the same amount of time as has been the case up to now. This milestone in production is made possible by the generator technology Vpulse EDM, which sets the eroding beat at the heart of the QXD 250.

Products • July 15, 2016

Full-Flow Filtration Technology

VOMAT says its full-flow filtration technology completely separates dirty oil from clean oil and allows for grinding with optimally cleaned cooling lubricants. VOMAT's filtration systems clean the oil so efficiently that it's useful life is much longer than if it were filtered with conventional filter systems still using paper filters or other expensive disposable filter media. A pleasant side effect is the low operating costs.

Products • July 15, 2016

Vgrind 360 Tool-Cutter

With greater scope in terms of its travel capabilities, the new Vgrind 360 is able to machine tools up to a diameter of 200mm, depending on the geometry. Just like its predecessor, the Vgrind 160, the same effective kinematics with two vertical spindles allow for multi-level machining.

Products • July 15, 2016

CHC & CHP Sharpening machine series

Intended for hook and clearance surfaces of carbide-tipped saw blades, the CHP 840 and 1300 universal sharpening machines with four CNC-controlled axes are suitable for the complete machining of all commonly found tooth geometries, according to Vollmer of America.

Products • July 15, 2016

CM 200 and 300

The use of carbide- or cermet-tipped thin-kerf metal circular saws allows for high feed rates, low machining forces and thin saw kerfs—all of which reduces energy consumption and saves resources, according to Vollmer of America, which specializes in grinding and erosion machines, and develops sharpening machines such as the CM 200/300 and the CMF 200/300.

Products • July 15, 2016

CHD270

Vollmer of America's CHD270 is a sharpening machine with 8 CNC-controlled axes and a measurement device, and it's intended for the automatic machining of carbide-tipped circular saw blades with various diameters and tooth geometries on face and top.

Products • July 14, 2016

Style M and R Air Chuck Jaws

Dillon Chuck Jaws announces a new line Air Chuck Jaws including both Style M and Style R, such as those often machined using air chucks. CNC-machined for accuracy, the pins serve as a locator and allow precise repeatability plus fast installation.

Products • July 14, 2016

CIMPULSE 49MP Multipurpose Fluid

Milacron Fluid Technologies brand CIMCOOL announced a new product release to its CIMPULSE metalworking fluid line. CIMPULSE products are designed to cover a broad-range of applications with trouble-free performance allowing customers to use one product across a range of operations.

Products • July 14, 2016

Rebel-S 4-axis SCARA Robot

Comau introduces Rebel-S, its own 4-axis SCARA robot, in five different models with a payload of 6kg and three different reaches. All models are controlled by the R1C 19" rack-mounted controller, which can be integrated into a single cabinet to control an entire line.