Products

Products • April 21, 2023

multiScan100 Family

With the launch of the multiScan product family, SICK presents 3D LiDAR sensors that provide mobile platforms with a 360° all-round view in 3D. Due to the up to 690,000 measuring points, the multiScan100 achieves a state-of-the-art precision with which nothing in its environment escapes its notice.

Products • April 19, 2023

Model ZMM-1

Featuring a 1:4 zoom ratio, the Titan Tool Supply Model ZMM-1 industrial inspection zoom microscope offers constant focal length, highly favorable depth of field, a large field of view at 15X magnification, and a higher magnification with smaller field of view at 60X as standard. When used with the optional extra 20X eyepiece, the Model ZMM-1 can additionally perform reliable and accurate remote visual inspections of a workpiece over an expanded magnification of up to 120X –all without the need for a change of lens.

Products • April 19, 2023

Round Bumpers

The bumpers, commonly identified as RB-516 come in a variety of mounting options such as tapped hex shoulder and threaded, stud mount, and steel plate mounted. They come in black neoprene, white nitrile, or colored urethane. Diameters sizes run from ¾ in. to 2 ¼ in. with metric sizes available from 19-57 mm.

Products • April 18, 2023

Automated AM Validation Solutions

The density determination solution is a metrological system which has been developed for the rapid and highly accurate density determination of components, and has a particular significance when analysing AM-produced parts. Porosity in AM parts can be a problem because it can weaken the mechanical strength and stability of the parts, reduce their durability, and make them more susceptible to failure under stress. Porosity can also affect the thermal and electrical properties of the parts and make them less resistant to high temperatures, corrosives, and other environmental factors.

Products • April 18, 2023

Standard Dual Force Machine Vise

It features friction reducing needle bearings and hardened jaw plates and vise bed. What makes the Palmgren line of Dual Force machine vises so unique that they are designed for precision part clamping as well as ideal for use in running production parts where datums, flatness and parallelism are key.

Products • April 15, 2023

XPR105MCP Multichannel Pipette Calibration Balance

The results of a single dispense of up to 12 channels are calculated in under one minute. The unique and innovative XPR105MCP tests each pipette channel individually on the same load cell to ensure equal measurement performance. The load cell is protected from any spills to ensure lifelong performance.

Products • April 14, 2023

HALCON Version 23.05

With HALCON 23.05, it is now possible to further optimize the underlying deep learning networks, which are already pre-trained on industry-related images, for the user's own application. This allows even more robust recognition rates for Deep OCR applications as well as an even more reliable detection of suitable gripping surfaces for applications using 3D Gripping Point Detection technology. In addition, there are many other helpful improvements, such as the fact that external code can now be integrated into HALCON more easily.

Products • April 14, 2023

ONMX Inserts

The latest Pramet range includes three variants of a 16-edged ONMX insert for depths of cut up to 0.157" (4mm). The standard geometries include the F for light operations, M for versatile use, and R for rough cuts in a variety of materials. Additionally, the 8-edged ONMX-W is a specific wiper insert for high-quality surface finish with large cutters and high feed rate.

Products • April 14, 2023

Two-Press Production Cell

The two-press production cell uses a centralized control station which sets the operating parameters of both presses and controls the action sequences of both FANUC robots. All equipment in the cell is automatically updated with new process parameters when changing between products. n

Products • April 14, 2023

ModuleWorks 2023.04 Software

Users can choose between the climb or conventional cutting methods and define the contact point between the tool and the workpiece, e.g. in the middle of the flute. This is relevant for non-ball cutters like chamfer mills where careful control over the cutting conditions creates chamfered edges with a high quality finish.

Products • April 13, 2023

Toolpaths for Powder-Bed-Fusion (PBF)

Integrated into the Rafinex solution, the ModuleWorks software generates highly automated, collision-free toolpaths for PBF. The workflow enables users to quickly program resilient, high-performance parts for production where expert knowledge of the manufacturing process is not required. The pre-defined parameters assist engineers in optimising the workpiece geometry for the PBF process to generate a toolpath and NC code that automatically minimises material waste.

Products • April 12, 2023

Target-Net

The measurement targets are distributed uniformly at intervals of approx. 100 millimetres across the entire Target-Net. The Target-Net itself measures 1500 x 2500 millimetres and has in total approx. 300 measurement targets. Thanks to the high measurement target density, several scans can be performed very quickly from different perspectives.