Products

Products • April 7, 2023

Standard and Lift-Check Die Flipping Hoist Rings

Die flipping hoist rings are available in both inch and metric dimensions as a standard or Lift-Check™ style that features a proprietary hex head bolt with Go / No-Go identification. The rings are CE Certified and constructed of alloy steel with a black oxide body and zinc plated (gold) shackle. All the rings are made in the USA, magnetic particle inspected, conform to ASME B30.26 and MIL-STD-209, and feature a 5:1 strength factor.

Products • April 7, 2023

Tiger·tec Gold WSM35G Milling Grade

The new grade is Walter's response to the upwards trend towards milling steel with difficult machining properties and wear-resistant stainless steel, such as found in applications in the energy and aviation industries. WSM35G meets the most stringent requirement for process reliability, which is highly valued in the automotive sector, and is also suitable for general mechanical engineering applications.

Products • April 7, 2023

TruPrint 1000

The printer features two 200-watt lasers and a multiplate option, which allow users to run multiple builds without operator intervention by automatically exchanging the build plate. Users can stack up to four build plates on top of each other in the build cylinder, and the system prints components on them one after the other.

Products • April 6, 2023

Mx 9.1 Software

Mx 9.1 software extends Zygo's collaborative metrology software with Asphere+ Analysis functionality, providing a common toolset to explore aspheric surface data obtained using any instrument. Best-fit prescriptions can be obtained for a wide range of surface types, and the 3D deviation between part and design can be examined and exported for process control feedback

Products • April 6, 2023

Q-Span Automated Gauging System

Data from all gauges in the Q-Span System – including thread gauges, robotic calipers, LVDT probes, drop gauges, bore gauges, laser micrometers, vision system, 2D telecentric profilers, and more – is combined into one convenient output for statistical process control (SPC). Data from any or all gauges can be used in real time for in-process decision making and process monitoring.

Products • April 5, 2023

H-Carb Series 77 End Mills

The H-Carb Series 77 end mills specialize in deep axial trochoidal and high-speed machining applications and are offered in various lengths of cut. The specially designed core and flute design improve rigidity and chip flow while reducing deflection. The seven-flute design allows for superior finishes at higher speed and feed rates versus 5 and 6 flute tools.

Products • April 5, 2023

Metal Cutting Tools and Solutions

The product expansion includes best-in-class features and advanced technology for metal cutting applications. The launch includes eight products that expand on and support existing platforms in delivering superior performance across multiple applications as well as address common machining challenges

Products • April 5, 2023

Factory-Rebuilt Presses

During the rebuild process, AP&T technicians disassemble and thoroughly examine the press. They replace worn parts and outdated systems and components before reassembling the press and performing a test run and safety check. All exchanged parts are covered by AP&T's new-part warranty.

Products • April 4, 2023

Volume Graphics 2023.1 Software

CT-data analysis software for inspection has a quality role in nearly every industry that has critical parts and processes that need monitoring for faults and variations. These include automotive, aerospace and electronics, among others. Volume Graphics' software tracks, analyses, and visualizes porosity/inclusions, delaminations, fiber or grain orientations, deformations and areas of low density and weakness. It is used to compare the "as-designed" and "as-manufactured" product to ensure compliance to specifications and intended performance.

Products • April 4, 2023

GRC-R12 Robot Cell

The cell has a 6-Axis FANUC M-10iD/12 Robot with 4.7' (1,441 mm) reach, capable of handling a maximum load of 26.5 lbs (12 kg). The GRC-R12 features a pneumatic single-or double-gripper system. The drawer feed system can have up to six drawers that can be unloaded and reloaded while the robot cell and machining center are in operation. With GROB's unique machine design, excellent chip control inside the machining center allows for long periods of unmanned operation without faults. Offering high customizability, customers may select from capabilities such as a blowoff box, SPC drawer and an alignment station.

Products • April 1, 2023

Version 3.40 of edgeProducts

Version 3.40 of the edge products includes a number of new features that greatly facilitate integration with standard Docker IT solutions. With version 3.40 of its edge products, Softing Industrial continues its commitment to improving connectivity at the interface of OT and IT and facilitating the use of standard IT management and monitoring solutions.

Products • March 31, 2023

MERLIC 5.3

The deep learning technology for object detection is now also available in MERLIC. The "Find Object" tool locates trained object classes and identifies them with a surrounding rectangle (bounding box). Touching or partially overlapping objects are also separated, which allows counting of objects. Labeling and training are possible without programming knowledge using the free MVTec Deep Learning Tool. The trained network can then be loaded into MERLIC and used with a single click.