Products

Mikron Corp. Monroe provides cutting tools from 0.004" (0.1mm) to 0.25" (6.0mm) in diameter for machining stainless steel, titanium, chrome-cobalt and high-temperature alloys. These include the CrazyDrill Twicenter with through-coolant ducts for centering, the CrazyMill Cool through-coolant milling cutter, the CrazyMill Chamfer deburring tools and the CrazyDrill Inox drill, which is available with or without through-coolant. The tools impart fine surface finishes, making secondary operations unnecessary, according to the company.

Nachi America Inc. says its Aqua Drill EX Flat series provides one-step drilling. The drill eliminates the need for a center drill or endmill on inclined or curved surfaces. The 180° flat cutting edge creates a minimal exit burr. The tools feature the Aqua EX coating for enhanced heat and wear resistance. New fractional sizes will be available in May.

Cobra Carbide Inc.'s ADDER universal endmills have a 40° helix and a variable-flute geometry. According to the company, the endmills enable chatter-free milling in hard, ferrous materials and impart fine surface finishes. The coatings reportedly allow users to dramatically increase feeds and speeds, take deeper DOCs and extend tool life.

Eriez' air-operated lift-magnet system moves multiple parts or cutouts up and off of burn tables. It also can lift single sheets or plates up to 3" (76.2mm) thick from a stack to load a table. The system improves productivity and safety by eliminating manual handling of multiple parts and the need for operators to climb on burn tables, according to the company. Standard models have 24" (609.6mm), 48" (1,219.2mm) and 120" (3,048mm) designs to accommodate most common plate and sheet sizes.

Sandvik Coromant Co. says the GC4305-grade insert maximizes metal-removal rates, shortens processing times and enhances component quality when turning steel. It is made of a heat-resistant cutting material that is suitable for dry machining, which is ideal for automotive part manufacturers that seek to avoid the stresses tools experience as a result of temperature fluctuations. The insert features the company's wear-resistant Inveio coating.

Kyocera Precision Tools Inc. says positive-style inserts with its WP chipbreaker and a wiper cutting edge impart fine surface finishes at low cutting forces. The chipbreaker stabilizes chip conditions at low feed rates, controls excess chip breaking during high-feed and high-load machining and prevents tearing of the finished surface by controlling adhesion. The inserts are for machining steel and stainless steel and are available in a variety of CVD- and PVD-coated grades.

G.W. Schultz Tool Inc.'s HGW series tools are available with four, five or seven flutes and are for machining high-temperature alloys, tool steel and most stainless steel alloys. Designed for high-efficiency machining, the nACo-coated tools are suitable for full slotting, climb milling and dry cutting with a high feed. According to the company, customers increased tool life 10 to 30 percent while spending 5 to 30 percent less money.

SwiftCARB offers a complete line of straight-shank and shell-mill indexable-insert corner rounders. According to the company, the tools increase cutting speeds and feed rates by 25 percent, and the tools' inserts can be changed quickly, which enhances efficiency. The company stocks more than 70 radii, from 0.010" to 1" and from 1mm to 25mm.

Leistritz Advanced Technologies Corp. designs cutting tools to fit any spindle in any machine tool. It offers tools for end facing, profile form turning, endmilling, step drilling, thread milling and key seating. According to the company, this high level of expertise and specialization is available to manufacturers seeking to enhance productivity in the aerospace, automotive and medical fields.

Rani Tool Corp. offers German-made PCD inserts with CB3 chipbreakers from Becker Diamond Tools. The chipbreaker has a semiserrated wave profile on the flanks of the cutting point, which increases the material-removal rate and produces short, controlled chips. The inserts are suitable for machining with flood coolant or minimal-quantity lubrication.

Midwest Industrial Tool Grinding Inc. (MITGI) expanded its standard line to include more than 280 thread mills. The tools are available uncoated or with an AlTiN coating. The line includes single-flute, NPTF full-form straight or helical, NPT full-form straight or helical, UN full-form straight or helical, and metric full-form straight or helical thread mills. Specials can be ordered.

Manufactured by Kaiser Tool Co., the THINBIT GROOVE 'N TURN line includes Dovetail grooving inserts and Static O-Ring Grooves. The inserts are for machining O-ring dovetail grooves with 66° undercut angles. According to the company, the insert design is optimized for strength by using a left/OD and right/ID insert pair to generate the groove form. Static O-Ring Grooves are available in OD and face grooving styles.