Products

Products • December 17, 2022

L-703B Self-Centering Bore Alignment System

Hamar Laser's L-703B Self-Centering Bore Alignment System makes bore alignment easier and up to 75% faster than competing systems. The new L-703B Laser replaces the L-705 Laser for applications where the laser is mounted externally. Smaller and lighter than the L-705, the L-703B works with Hamar Laser's patented, self-centering targets that require only one measurement per bore. Applications include engine blocks, compressor bores, cylinder bores, shaft bearing bores, stern tubes and more.

Products • December 17, 2022

PS2000 Power Supply

The PS2000 variants combine high-performance power supply units from Beckhoff with the ultra-fast EtherCAT communication standard. This allows the control system to directly process extensive measurement data and internal device diagnostics information and establish remote access to power supplies. It also provides advanced monitoring features for the DC output (for system monitoring) or the AC input (for source monitoring).

Products • December 16, 2022

M18 FUEL Braking Die Grinders

Both die grinders feature RAPIDSTOP™ Brake for enhanced user safety, stopping most accessories in less than two seconds. Combining three exclusive innovations - the POWERSTATE™ brushless motor, REDLITHIUM™ battery pack, and REDLINK PLUS™ intelligence- these new die grinders provide users with the versatility and performance needed to remove material faster than a corded die grinder.

Products • December 16, 2022

MaxiMill 491

The MaxiMill 491 system provides exceptional ease of use, allowing users to quickly exchange inserts while the tool remains in the machine. This capability significantly reduces machine downtime while the precision-ground inserts deliver stable and smooth cutting thanks to CERATIZIT's state-of-the-art Dragonskin coating technology. Plus, the Dragonskin coating gives the inserts added strength for even the most demanding of machining conditions

Products • December 15, 2022

CorShield Resealable Bubble Bags and Static Shielding Bubble Bags

Using Vapor phase Corrosion Inhibitor (VpCI®) technology, the bubbles protect a variety of metals, including carbon steel, aluminum, copper, brass, silver and stainless steels, without leaving film or residue on packaged items. CorShield® Bubble Bags are non-toxic and recyclable. Components that need protection are placed in the bags and in matter of hours, the vapor from the VpCI® bubbles saturates the enclosed airspace.

Products • December 14, 2022

Miniature Lead Screws and Nuts

The miniature lead screw line is available with either standard or anti-backlash lead nuts to optimize positional accuracy, friction and repeatability. The anti-backlash lead nut design reduces friction between the nut and screw threads in order to optimize efficiency while still eliminating play between the lead screw and nut.

Products • December 14, 2022

GN 9192 Down-Thrust Clamp

The down-thrust clamp GN 9192 made from case-hardened steel can be fastened to a machine table with T-slots or to a fixture plate. The clamping arm can then be swiveled by hand and positioned over the inserted workpiece in any position. Turning and tightening the clamping screw or the adjustable hand lever lowers the clamping arm to hold the workpiece in place. After release, workpieces can be removed again from above just as quickly and easily once the clamping arm has been swiveled to the side – even when space is tight.

Products • December 13, 2022

S-600 Series SD and MicroSD Cards

Swissbit's S-600 series is the first range to incorporate the new Hyperstone S9 NAND Flash Controller, explicitly developed for use in industrial applications. Unique firmware features guarantee an extended lifetime of safe and reliable storage of even the smallest data. First-class data preservation and data integrity is delivered in all situations: in high temperature conditions, through non-continuous writes, or sudden power failures.

Products • December 13, 2022

Aluma Cling-Red

ALUMA-CLING RED reduces the number of steps to obtain a clean, bright surface. Easy to use, this proven formulation can help manufacturers and fabricators to clean and use aluminum that might otherwise be scrapped due to staining issues. In addition to removing sub-surface staining, it is ideal for removing soil and laser scale, heat treat scale, and white oxidation from aluminum, aluminum substrates, mild steel, stainless steel, copper, and more.

Products • December 13, 2022

DTect-IT

DTect-IT is a versatile CNC sensor analysis system that takes in data from a multitude of high-precision sensors. The surface roughness measurement application uses the Blum-Novotest TC64 RG Digilog Probe as the sensor input in DTect-IT to analyze the surface of a part.

Products • December 13, 2022

ZA6 Robot

The ZA6 is the only industrial robot to use Python as its programming language. Python is popular, easy to learn, powerful, and because it's commonplace, it makes it incredibly easy to integrate ZA6 with other Python-driven systems. With over 200,000 Python libraries available, most of the work required to connect the ZA6 to the outside world has already been done.

Products • December 13, 2022

Leveling Feet

The swivel feet with a steel double bolt down base includes two screw holes enabling secure surface attachment. The threaded female design accepts inserts from M6 up to M16 while the foot diameter varies from 40mm to 100mm. The swivel joint allows 50° forward and backwards tilt across a 360° horizontal plane, providing flexible installation whatever the floor angle. This design is manufactured in durable steel with a nickel plating to resist corrosion and provide a bright finish.